Fujitsu Siemens Computers 5110 FA No display power indicator lights, The screen becomes darker

Colour monitor 5110 FA

No display (power indicator lights)

ÊCheck whether the computer is switched on.

ÊCheck whether the data cable for the monitor is correctly attached to the monitor port on the computer.

ÊPress any key on the computer keyboard – the computer may be in energy saving mode.

ÊAlter the brightness and/or contrast until you get a picture.

Picture disturbances (vertical and horizontal lines, picture noise)

ÊPerform auto-adjustment (AUTO TUNE).

If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT, i Windows Me, Windows 2000 or OS/2 (with Windows emulation installed) is used, the

basic monitor settings can be set with the floppy disk supplied.

Permanently unlit or lit pixels

The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number of pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).

Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are about 4 million dots in total.

The flat screen monitors from Fujitsu Siemens Computers are typically considerably better than requirements defined in this standard.

The screen becomes darker

The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be exchanged. Please contact our Help Desk.

A26361-K872-Z100-1-5E19 English - 23