8-65
Cisco Signaling Gateway Manager User Guide
OL-7064-01
Chapter8 Working with Linksets
Viewing Linkset Information Using a Web Browser
Poll Error Message Last error message received by the linkset. If there have been no polling
errors, this field is not displayed.
Local Point Code Point code of the primary signaling point for the linkset.
Adjacent Node Name of adjacent node for the linkset. To see detailed information for
the adjacent node, click the node name.
Adjacent Signaling Point Name of adjacent signaling point for the linkset. To see detailed
information for the adjacent signaling point, click the signaling point
name.
Adjacent Point Code Point code of the adjacent signaling point for the linkset.
Linkset Type Type of linkset, which SGM determines by examining the links defined
in the linkset. Possible linkset types are:
•HSL—The links in this linkset use the SS7-over-ATM
(Asynchronous Transfer Mode) high-speed protocol.
•SCTPIP—The links in this linkset use the Stream Control
Transmission Protocol (SCTP) IP transport protocol.
•Serial—The links in this linkset use the serial SS7 signaling
protocol.
•Mixed—The links in this linkset are of two or more types. (This
configuration is not recommended.)
•Virtual—The links in this linkset are virtual links, which connect
signaling point instances running on the same device. SGM does not
poll virtual linksets, nor does it display real-time data or accounting
statistics for virtual linksets.
Note Prior to IOS release 12.2(23)SW1, virtual linksets on
multi-instance routers were created manually by the user. Within
and after that release, virtual linksets are created automatically.
•Other—No links have been defined for this linkset.
Links Total number of links in the linkset.
Active Links Number of links in the linkset that are Active.
Congested Links Number of links in the linkset that are Congested.
Note Note associated with this linkset. If there is no note associated with this
linkset, this field is blank.
Field Description