Chapter 8 Working with Linksets

Viewing Linkset Information Using a Web Browser

SGM Links Detail Table

The SGM Links Detail table displays the following information about links associated with the selected linkset:

Column

Description

SLC

Signaling link code (SLC) ID for the link.

 

 

Type

Type of link. Possible link types are:

HSL—The link uses the SS7-over-ATM (Asynchronous Transfer Mode) high-speed protocol.

SCTPIP—The link uses the Stream Control Transmission Protocol (SCTP) IP transport protocol.

Serial—The link uses the serial SS7 signaling protocol.

Virtual—The link is a virtual link, which connects signaling point instances running on the same device. SGM does not poll virtual links, nor does it display real-time data or accounting statistics for virtual links.

Interface Name

Primary IP address and interface name of the link. The primary IP address is the

 

first CS7 local IP address configured in the ITP. For example, if the following IP

 

addresses are configured in the ITP:

 

cs7 local-peer 4180

 

local-ip 128.3.0.77

 

local-ip 128.3.0.254

 

Then SGM uses 128.3.0.77 as the primary IP address. If at any time that IP

 

address is deleted from the ITP configuration, or if a new IP address is added to

 

the beginning of the list, SGM detects the change and automatically updates this

 

field to reflect the new primary IP address.

 

If the link has no interface name, this field is blank.

 

 

Ports

Local and remote ports for the link.

 

 

QoS

Quality of service (QoS) class of the link.

 

Cisco Signaling Gateway Manager User Guide

8-70

OL-7064-01

Page 70
Image 70
Cisco Systems OL-7064-01 manual SGM Links Detail Table, Signaling link code SLC ID for the link, Interface Name, Ports, QoS