Cisco Systems OL-7064-01 manual Active Links, Congested Links, Ignored

Chapter 8 Working with Linksets

Viewing Basic Information for Linksets

Column	Description
Linkset Type	Type of linkset, which SGM determines by examining the links defined in the
	linkset. Possible linkset types are:

•HSL—The links in this linkset use the SS7-over-ATM (Asynchronous Transfer Mode) high-speed protocol.

•SCTPIP—The links in this linkset use the Stream Control Transmission Protocol (SCTP) IP transport protocol.

•Serial—The links in this linkset use the serial SS7 signaling protocol.

•Mixed—The links in this linkset are of two or more types. (This configuration is not recommended.)

•Virtual—The links in this linkset are virtual links, which connect signaling point instances running on the same device. SGM does not poll virtual linksets, nor does it display real-time data or accounting statistics for virtual linksets.

Note Prior to IOS release 12.2(23)SW1, virtual linksets on multi-instance routers were created manually by the user. Within and after that release, virtual linksets are created automatically.

	• Other—No links have been defined for this linkset.
Links	Total number of links in the linkset.
Active Links	Number of links in the linkset that are Active.
Congested Links	Number of links in the linkset that are Congested.
Ignored	Indicates whether the linkset is to be included when aggregating and displaying
	SGM status information:
	• Clear the checkbox to include the linkset. This is the default setting.
	• Select the checkbox to exclude the linkset.
	This field can be edited by users with authentication level Power User (Level 2)
	and higher.
Notes	Indicates whether there is a note associated with the linkset.

	Cisco Signaling Gateway Manager User Guide
8-8	OL-7064-01