Chapter 8 Working with Linksets
Deleting a Linkset
When you redefine the linkset (that is, when you define a linkset with the same destination point code as the original linkset, but not necessarily with the same linkset name), SGM rediscovers the linkset and labels it with the appropriate status (such as Active).
Deleting a Linkset from the SGM Database
Typically, you delete a linkset in the SGM database for one of the following reasons:
•You have physically deleted the linkset from your network. This is the most common reason for deleting a linkset from the SGM database.
•The linkset is Unknown or Unavailable, you are aware of the reason, and you no longer want to see it in SGM displays. For example, the linkset might be associated with a node that was removed from the network, or it might be a previously discovered linkset associated with a test lab device.
If you have physically deleted a known linkset from your network, and you then delete it from SGM, it is no longer in the SGM database, it does not appear in SGM windows, and it is not discovered when you run Discovery.
If you have not physically deleted a known linkset from your network, and you delete it from SGM, SGM also automatically deletes all associated links from the SGM database. However, at the next poll SGM finds the linkset and associated links and adds them back to the SGM database, setting the status appropriately. If this happens, do not delete the linkset again. Instead, set it to Ignored. See the “Ignoring a Linkset” section on page
Note If you delete a linkset from the SGM database, the linkset is deleted for all SGM clients and views connected to that SGM server.
If you delete all linksets to an Unmanaged node, SGM does not automatically delete the node. Instead, you must manually delete the node. See the “Deleting a Node” section on page
|
| Cisco Signaling Gateway Manager User Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
