Chapter 8 Working with Linksets
Viewing
| For each linkset, the Linkset Details: Linkset Access Lists section displays the |
| following information: |
|
|
Column | Description |
|
|
Poll Interval | Poll interval used to collect data for the table. |
|
|
Last Poll | Time the last poll was run. |
| This field initially displays the phrase Polling device. After the first polling cycle, |
| SGM populates this field with the actual time of the last poll. |
|
|
Linkset | Name of the linkset for which access lists are being displayed. |
|
|
In | Inbound access lists for the linkset. If the linkset has no inbound access lists, this |
| field displays None. |
|
|
Out | Outbound access lists for the linkset. If the linkset has no outbound access lists, this |
| field displays None. |
|
|
List # | Access list number configured on the node and applied to the linkset. ITP uses |
| access list numbers 2700 through 2799. |
|
|
Access List | List of commands in the access list. |
|
|
Viewing Real-Time Data for a Linkset
SGM enables you to view detailed statistics for a selected linkset, including its associated links, status, and other information. Detailed information for the selected linkset is displayed in the left column, and for the adjacent linkset in the right column.
To display detailed statistics for a linkset, select Linksets in the left pane of the SGM Main Window,
Updates for the linksets that are received from the SGM server are reflected automatically in this window.
Changes you make in this window might not be reflected throughout SGM until the next poll (by default, every 15 seconds). For information about changing the poll interval, see the “Linkset Statistics Details: Poll Settings” section on page
| Cisco Signaling Gateway Manager User Guide |
