8-21
Cisco Signaling Gateway Manager User Guide
OL-7064-01
Chapter8 Working with Linksets
Viewing Detailed Information for a Linkset
General Information
The General Information sub-section contains the following fields:
Field Description
Linkset Type Type of linkset, which SGM determines by examining the links defined in the
linkset. Possible linkset types are:
•HSL—The links in this linkset use the SS7-over-ATM (Asynchronous
Transfer Mode) high-speed protocol.
•SCTPIP—The links in this linkset use the Stream Control Transmission
Protocol (SCTP) IP transport protocol.
•Serial—The links in this linkset use the serial SS7 signaling protocol.
•Mixed—The links in this linkset are of two or more types. (This
configuration is not recommended.)
•Virtual—The links in this linkset are virtual links, which connect
signaling point instances running on the same device. SGM does not poll
virtual linksets, nor does it display real-time data or accounting statistics
for virtual linksets.
Note Prior to IOS release 12.2(23)SW1, virtual linksets on multi-instance
routers were created manually by the user. Within and after that
release, virtual linksets are created automatically.
•Other—No links have been defined for this linkset.
Inbound ACL Inbound IP access control list (ACL) number for the linkset.
If there is no inbound ACL for the linkset, this field displays 0.
If the linkset is a Virtual linkset, this field displays N/A.
Outbound ACL Outbound ACL number for the linkset.
If there is no outbound ACL for the linkset, this field displays 0.
If the linkset is a Virtual linkset, this field displays N/A.