Cisco Systems OL-7064-01 manual Utilization Information, Send Plan Capacity, Send Utilization %

Chapter 8 Working with Linksets

Viewing Real-Time Data for a Linkset

Utilization Information

The Utilization Information sub-section contains the following fields:

Field	Description
Send Plan Capacity	Planned capacity of the linkset to send, in bits per second.
	• For a linkset of type Serial or HSL, available bandwidth for the linkset.
	• For a linkset of type SCTPIP or Mixed, set on the ITP using the
	plan-capacityCS7 linkset configuration command.
	If Send Plan Capacity is not set on the ITP for one or more of the links
	associated with this linkset, this field displays the value 0.
	• For a linkset of type Other, this field always displays the value 0.
Send Utilization %	Amount of the linkset’s send capacity being used, as a percentage or in
	Erlangs (as set in the Preferences window), calculated using the following
	formula:
	Send Utilization % = (Bits Sent Per Sec)/Planned Capacity
	This field initially displays the phrase Waiting for second poll. After two
	polling cycles, SGM populates this field with actual calculated rates.
	• For a linkset of type SCTPIP or Mixed, if Send Plan Capacity is not
	set on the ITP for one or more of the links associated with this linkset,
	this field displays the phrase Set Plan Capacity on ITP.
	• For a linkset of type Other, this field always displays the phrase Set
	Plan Capacity on ITP.

	Cisco Signaling Gateway Manager User Guide
OL-7064-01		8-33