Panasonic DMR-E65 manual Error messages, On the television, On the unit’s display

Error messages

	On the television				Page
	Cannot finish recording	≥The programme was copy-protected.			—
	completely.	≥The disc may be full.			—
	Cannot playback this title.	≥You tried to play a title recorded using a different encoding system from that of the TV			43
	TV system is different from the		system currently selected on the unit.
	setting.		Alter the “TV System” setting on this unit to suit.
	To playback this title, please
	change the TV System in
	SETUP.
	Cannot record on the disc.	≥The disc may be dirty or scratched.			44
		≥You cannot format a Microdrive or mobile hard disk on this unit.			—
	Please check the disc.
	Unable to format.
	Cannot play on this unit.	≥You tried to play a non-compatible image.			24
		≥Turn the unit off and re-insert the card.			24
	Cannot record. Disc is full.	≥Create space by erasing any unnecessary titles. [RAM]			22, 29,
			(Even if you erase recorded content from the DVD-R, there is no increase in disc space.)		36, 37
	Cannot record. Maximum
		≥Use a new disc.			—
	number of titles exceeded
	Error has occurred. Please	≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering			—
	press ENTER.		(“SELF CHECK” appears on the unit’s display).
	No Disc	≥The disc may be upside down.			—
	No folders.	≥There is no compatible folder in this unit.			13
	No PC CARD	≥The card is not inserted. If this message is displayed with a compatible card already			24
	No SD CARD		inserted, turn off the unit, remove and then re-insert the card.
	No valid PC card.	≥The card inserted is not compatible or the card format does not match.			13
	No valid SD card.
	Not enough space on dubbing	≥Create space by erasing any unnecessary items.			22, 25, 29,
	destination.				32, 36, 37
	Please change the disc.	≥There may be a problem with the disc. Press [< OPEN/CLOSE] on the main unit to			44
			remove it and check it for scratches or dirt. (The unit turns off automatically after you open
			the tray.)
	This is a non-recordable disc.	≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.			—
		≥You inserted an unformatted DVD-RAM. Format the disc with this unit.			37
	This disc is not properly
Reference	formatted.
	Formatting is necessary using
	DISC MANAGEMENT.
	$	≥The operation is prohibited by the unit or disc.			—
	On the unit’s display
	HARD ERR	≥If there is no change after turning the unit on and off, consult the dealer where the unit was			—
			purchased.
	NO READ	≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.			44
		≥You have used a DVD-RAM/PD lens cleaner and it has finished. Press [< OPEN/CLOSE]			—
			on the main unit to eject the disc.
	PROG FULL	≥There are already 16 timer programmes. Delete unnecessary timer programmes.			19
	REMOTE DVD 	≥The remote control and main unit are using different codes. Change the code on the			11
	(“∑” stands for a number.)		remote control.
				Press and hold [ENTER] and the indicated number
				button at the same time for more than 2 seconds.
	SELF CHECK	≥The unit is starting up. Wait until the message disappears.			—
	U14	≥The unit is hot.			—
			The unit switches to standby for safety reasons. Wait for about 30 minutes until the
			message disappears.
			Select a position with good ventilation when installing the unit. Do not block the cooling fan
			on the rear of the unit.
	U99	≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby.			—
			Now press [Í/I] on the main unit again to turn the unit on.
	UNSUPPORT	≥You have inserted a disc the unit cannot play or record on.			12
	X HOLD	≥The Child Lock function is activated.			44
			Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
RQT7450

48