Panasonic DMR-E65 manual Check, change or delete a programme, To change a programme

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

Icons

[This programme is currently recording.

WThe times overlap those in another programme. Recording of the programme with the later start time

starts when the earlier programme finishes recording.

FThe disc was full so the programme failed to record.

The material was copy-protected so it was not recorded.

XThe programme did not complete recording because the disc is dirty or some other reason.

Recording

TIMER					Remain 1:58 SP
RECORDING
					12:56:00 15. 7.	TUE
No.	Name	Date	Start	Stop	Mode spaceDisc
		New Timer Programme
SELECT				Press ENTER to store
ENTER	RETURN			new programme.

Message displayed in the “Disc space” line

OK: Displayed if the recording can fit in the remaining space.

>(Date): For recordings made daily or weekly, the display will show until when recordings can be made (up to a maximum of one month from the present

time) based on the time remaining on the disc.

!: It may not be possible to record because: ≥there is not enough space left

≥the number of possible titles has reached its maximum.

∫To change a programme

Press [3, 4] to select the programme and press [ENTER]. (➡page 18, step 3)

∫To delete a programme

Press [3, 4] to select the programme and press [¢ CANCEL].

∫To exit the timer recording list

Press [PROG/CHECK].

∫To put the unit on timer recording standby

Press [F TIMER].

The unit turns off and “F” lights on the unit’s display to indicate timer recording standby has been activated.

≥Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

RQT7450

19