Colour monitor 5110 FA
i | If you want to use the data cable with |
monitor to a second computer, proceed as follows: | |
| Ê Connect the |
| monitor (3) and secure the |
| Data cables with |
| After switching on the monitor you must select the desired input with the OSD menu (see |
| "Operation of the monitor" chapter). |
ÊInsert one plug of the audio line in the AUDIO IN (3) socket on the monitor and make sure it is properly engaged.
ÊPlug the power cable supplied into the power connector (4) of the monitor.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the operating manual for your computer.
i | If your computer has two monitor ports ("onboard" screen controller and separate |
graphics card), the monitor port for the separate graphics card is usually active. |
ÊConnect the data cable to the (active) monitor port on the computer and secure the
ÊInsert the other plug of the audio line in the audio input of the computer.
ÊPlug the connector of the mains cable provided into the monitor outlet of the computer or into a properly earthed outlet and ensure a safe connection.
ÊPlug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i appropriate graphics drivers for your application software. Details of how to do this are provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation.
Adjusting rake and rotation
The rake of the monitor can be adjusted by
ÊGrasp the monitor with both hands on the right and left edge of the casing and adjust it to the desired rake.
The monitor can be rotated by ± 30° from its centre position.
ÊGrasp the monitor with both hands on the right and left edge of the casing and rotate it into the desired position.
English - 9 |
