Fujitsu Siemens Computers 5110 FA manual Connecting the monitor, Connecting cables to the monitor

Colour monitor 5110 FA

Connecting the monitor

!	Observe the "Safety" in the "Important notes" chapter in this operating manual.
	CE conformance and optimum picture quality are guaranteed only if you use the data
	cable supplied.

Do not cover the ventilation openings of the monitor.

The computer power plug must be pulled out!

Ê Be sure that the monitor and the computer are switched off.

Connecting cables to the monitor

The monitor ports are protected by a cover.

ÊRemove the cover.

ANALOG	DIGITAL	AUDIO	POWER
	Fujitsu Siemens Computers
	Color Monitor 5110 FA
		1936-1100 -4240
1	2	3	4
1 = D-SUB connector (ANALOG)		3 = AUDIO IN socket
2 = DVI-D connector (DIGITAL)		4 =	Power connector

The data cable supplied has two 15-pin D-SUB connectors for the D-SUB connector of the monitor and of the computer.

ÊConnect one of the D-SUB connectors of the data cable to the D-SUB connector on the monitor (1) and secure the plug-in connection by tightening the safety screws.

8 - English A26361-K872-Z100-1-5E19