Fujitsu Siemens Computers manual Setting colour temperature and colours, Colour monitor 5110 FA

Colour monitor 5110 FA

Setting colour temperature and colours

Calling the COLOR ADJUST setting window

Selecting the colour temperature (COLOR TEMPERATURE)

The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can select from 9300 K, 6500 K, 5400 K and 5000 K.

Setting user-defined colours (USER COLOR TEMPERATURE)

In the user-defined setting you can change the colour ratios of the basic colours (red, green, blue) as required (selection with the B button).

Adjusting the intensity of the grey levels (Gamma correction) (GAMMA)

This function allows you to optimise the display of multimedia applications (white, red, green, blue).

Setting functions in the "ADVANCED MENU" menu

Calling ADVANCED MENU setting window

The functions SCALING and SHARPNESS are only made available if your monitor is not set to the maximal resolution (1600x1200).

Setting scaling (SCALING)

FILL ALL= Switch on the full-screen mode. The display area is stretched to the full picture size (1,280 pixels, side ratio 5:4). As a result, the display may appear distorted.

FILL ASPECT RATIO = Switch on the proportional full-screen mode: The display area is expanded to the maximum picture size while maintaining the side ratio (either full picture width or full picture height).

1:1 = full picture size (depending on the resolution)

Adjusting the picture quality in case of interpolation (SHARPNESS)

This function allows you to set the sharpness of the interpolation filter.

Thus the display can be optimised for pictures or texts.

Displaying the monitor information (INFORMATION)

This function allows you to display e.g. the current resolution and refresh rate.

A26361-K872-Z100-1-5E19 English - 15