Craftsman 536.772101 manual Lubrication, Howtochangethe Airfilter

Page 15

MAINTENANCE

LUBRICATION

After each 25 hours, apply a small amount of

engine oil to all moving parts, particularly the wheels.

How To Change The Engine Oil

Change the oil in the engine crankcase after each 25 hours of use.

NOTE: The

oil will

drain

more freely

when

Oil Drain Plug

the

engine

is warm.

 

 

 

 

Figure 11

1.

Disconnect

the

spark plug wire from the

 

 

spark plug.

 

 

 

 

 

 

 

2.

Remove

the

oil

drain

plug

(see

 

 

 

Figure 11). Drain the oil into a flat pan.

 

3.

After draining all the oil,

install and

tight-

 

 

en the oil drain plug.

 

 

 

 

 

4.

Remove

the

oil

fill cap

(see Figure

12).

 

 

Fill the engine crankcase.

Pour slowly.

Oil Fill Cap

 

Do not overfill. See "Product Specifica-

 

 

tions" for amount and type of oil. install the oil fill cap.

5.Connect the spark plug wire to the spark plug.

HOWTOCHANGETHE AIRFILTER

Replace the air filter once a year; more often in dusty or dirty conditions.

NOTE: DO NOT clean or oil the air filter. The air filter is not serviceable and must

be replaced.

1.Disconnect the spark plug wire from the spark plug.

2.Turn the cover to the left (counterclock- wise). Remove the cover and the air fil- ter from the flange. (see Figure 13).

3.Discard the air filter.

4.Clean the cover and the flange.

5.Install a new air filter into the cover.

6.Push the cover firmly against the flange. Turn the cover to the right (clockwise) until tight. Make sure the re- tainers are locked around the flange.

7.Connect the spark plug wire to the spark

plug.

F_001101M15

Figure 12

CAUTION: Never run the engine without the air filter. A defective air filter will

cause a loss of engine power. If dirt or dust enters the engine through the carbu- retor, the result will be excessive wear or damage to the engine. Replace a dam- aged or clogged air cleaner immediately.

To Remove,

Turn Counterclockwise

Flange

Cover

Air Filter

Retainer

To Install,

Turn Clockwise

Figure 13

Image 15
Contents F01101M EdgerContents FOllO1M3 Safety RulesRules SafetyWear Eye Protection Before Operating This Machine Slow Fast FuelPrimer Button StopAssembly AssemblyControl Rod HairPin Container of Oil HOW to Raise the Handle HOW to Prepare the Engine ArningRegulations Checklist Operation Know Your EdgerEYE Protection HOW to USE Throttle Control HOW to Stop the EdgerHOW to USE Engine Stop Lever HOW to USE Primer ButtonHOW to Start the Engine HOW to Stop the EngineEdging Tips General Recommendations MaintenanceCustomer Responsibilities Service Records Product SpecificationsHowtochangethe Airfilter LubricationCarburetor Adjustment Spark PlugSpark HOW to Remove the Belt Service and AdjustmentHOW to Replace the Blade Edger ServiceAdjustment StorageTrouble Shooting Chart Trouble CauseCorrection Repair Parts KEY NO. DescriptionKEY Partno Description 418 412 416 420 405 415 403 423 Partno KEY DescriptionDescription Partno KEY185 178 OO1101M25 KEY Part NO. NO.DESCRIPTION OO1101M27 OO1101M28 KEY Part Description 001101M Gggggg

536.772101 specifications

The Craftsman 536.772101 stands out in the world of outdoor power equipment, particularly for homeowners seeking efficiency and reliability in snow removal. This snow thrower is designed to tackle heavy snowfall with ease, providing a robust solution for clearing driveways and walkways during winter storms.

One of the main features of the Craftsman 536.772101 is its powerful 8.5 horsepower engine, which ensures optimal performance even under challenging weather conditions. The engine is designed to deliver high torque, allowing it to move snow quickly and efficiently. With a clearing width of 24 inches and an intake height of 21 inches, this machine can handle deep and wide snow accumulations, making it suitable for various snowfall scenarios.

The snow thrower's advanced auger system is another key characteristic that enhances its performance. The auger is engineered to efficiently scoop up snow and propel it through the discharge chute. The Craftsman 536.772101 is equipped with an innovative adjustable chute, allowing users to direct the snow up to 40 feet away in the desired direction. This feature is particularly useful for homeowners who need to manage snow placement effectively without creating additional obstacles in their yard or driveway.

In terms of technology, this model includes a user-friendly, electric start option that eliminates the hassle of pull-starting in freezing temperatures. The electric start ensures that users can quickly get the snow thrower up and running, even in the coldest of conditions. Additionally, the snow thrower features a six-speed transmission, providing versatility and control depending on the severity of the snowfall.

Durability and ease of use are also integral to the Craftsman 536.772101. The heavy-duty construction materials ensure that it can withstand harsh winter conditions, while the ergonomically designed controls provide comfort during operation. The padded hand grips enhance user comfort, allowing for extended use without strain.

Overall, the Craftsman 536.772101 combines innovative features, powerful technology, and robust construction to deliver a reliable snow removal experience. With its impressive capabilities, this snow thrower is a fantastic investment for those looking to simplify their winter maintenance routine. Whether faced with light flurries or heavy winter storms, the Craftsman 536.772101 proves to be a formidable ally in keeping properties clear of snow.