Safety Rules, FOllO1M3 | Craftsman 536.772101 specs

SAFETY RULES

Safe Operation Practices for Edger.

WARNING: Look for this symbol to point out important safety precautions.

It means: "Attention! Become Alertt Your Safety Is Involved."

tal starting when setting-up,

_lb ARNING: To prevent acciden- transporting, adjustin9 or mak-

ing repairs, always disconnect spark plug wire and put wire where it cannot contact the spark plug.

Before Use

•Read the owner's manual carefully. Be thoroughly familiar with the controls and the proper use of the Edger. Know how to stop the Edger and disengage the controls quickly.

•Do not operate the Edger without wearing adequate outer garments. Wear footwear that will improve footing on slippery sur- faces.

Operating Safety

•Never allow children or young teenagers to operate the Edger'. Keep them away while it is operating. Never allow aduits to oper- ate the Edger without proper instruction.

•Do not operate this machine if you are tak-

ing drugs or other medication which can cause drowsiness or affect your ability to

operate this machine.

•Do not use this machine if you are mentaily or physically unable to operate this ma- chine safely.

•Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect your eyes from foreign objects that may be thrown from the Edger.

•Do not put hands or feet near or under ro- tating parts.

•Keep the area of operation clear of all per- sons, particularly small children and pets.

•Thoroughly inspect the area where the Edger is to be used and remove all foreign objects.

Fuel Safety

•Handle fuel with care; it is highly flam- mable.

•Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

•Exercise caution to avoid slipping or falling.

•Never operate the Edger without proper guards, plates, or other safety protective devices in place.

•Never operate the Edger at high transport speeds on slippery surfaces. Look behind and use care when backing.

•Use an approved container.

•Check fuel supply before each use, allow- ing space for expansion as the heat of the engine and/or sun can cause fuel to ex- pand.

•Fill fueI tank outdoors with extreme care. Never fill fuel tank indoors. Replace fuel tank cap securely and wipe up spilled fuel.

•Never remove the fuel tank cap or add fuel to a running or hot engine.

•Never store fuel or Edger with fuel in the tank inside a building where fumes may

reach an open flame.

F_)OllO1M3

•Never allow bystanders near the Edger.

•Keep children and pets away while operating.

•Never operate the Edger without good visi- bility or light.

•Do net run the engine indoors. The ex- haust fumes are dangerous, containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS.

•Take aiI possib% precautions when leaving the Edger unattended. Stop the engine.

•DO not overload the Edger capacity by at- tempting to till too deep at too fast a rate.

536.772101 specifications

The Craftsman 536.772101 stands out in the world of outdoor power equipment, particularly for homeowners seeking efficiency and reliability in snow removal. This snow thrower is designed to tackle heavy snowfall with ease, providing a robust solution for clearing driveways and walkways during winter storms.

One of the main features of the Craftsman 536.772101 is its powerful 8.5 horsepower engine, which ensures optimal performance even under challenging weather conditions. The engine is designed to deliver high torque, allowing it to move snow quickly and efficiently. With a clearing width of 24 inches and an intake height of 21 inches, this machine can handle deep and wide snow accumulations, making it suitable for various snowfall scenarios.

The snow thrower's advanced auger system is another key characteristic that enhances its performance. The auger is engineered to efficiently scoop up snow and propel it through the discharge chute. The Craftsman 536.772101 is equipped with an innovative adjustable chute, allowing users to direct the snow up to 40 feet away in the desired direction. This feature is particularly useful for homeowners who need to manage snow placement effectively without creating additional obstacles in their yard or driveway.

In terms of technology, this model includes a user-friendly, electric start option that eliminates the hassle of pull-starting in freezing temperatures. The electric start ensures that users can quickly get the snow thrower up and running, even in the coldest of conditions. Additionally, the snow thrower features a six-speed transmission, providing versatility and control depending on the severity of the snowfall.

Durability and ease of use are also integral to the Craftsman 536.772101. The heavy-duty construction materials ensure that it can withstand harsh winter conditions, while the ergonomically designed controls provide comfort during operation. The padded hand grips enhance user comfort, allowing for extended use without strain.

Overall, the Craftsman 536.772101 combines innovative features, powerful technology, and robust construction to deliver a reliable snow removal experience. With its impressive capabilities, this snow thrower is a fantastic investment for those looking to simplify their winter maintenance routine. Whether faced with light flurries or heavy winter storms, the Craftsman 536.772101 proves to be a formidable ally in keeping properties clear of snow.