SERVICE AND ADJUSTMENTS
BLADEDRIVEBELT
ADJUSTMENT
If the blade drive belt is slipping due to lack of belt tension, follow the steps below.
1.Stop engine, wait for all parts to stop moving, an d disconnect spark plug wire.
2.Remove belt cover as described in "Belt Cover Removal" instruc- tions.
3.With mower on level ground, adjust blade cutting height at about 3" (measure fro.m ground to flat portion of blade).=
4.With the Blade Drive Control (Figure
(D).
5.Reinstall the belt cover
securely.
6.Test the operation of the blade brake (see "Blade Brake Control
Test").
7.If the drive belt slips during op- eration, it may be necessary to re- locate idler (J, Figure
it forward to take up slack in the belt.
8.Engage the blade drive and measure the distance (X, Figure
-<--Adjustidlerin direction
ofarrowtotighten belt
Figure 5-9: Blade drive adjustment.
28