Lawn Mower, Engine, Cylinder, Other | Craftsman 917.387402 manual

Immediately prepare your lawn mower for storage at the end of the season or ifthe unit will not be used for 30 days or more

LAWN MOWER

When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving pads for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint

surfaces; sand lightly before painting.

HANDLE

You can fold your lawn mower handle for storage.

•Squeeze the bottom ends of the lower handle toward each other until the lower

handle clears the handle bracket, then move handle forward.

•Loosen upper handle mounting bolts

enough to allow upper handle to be folded back.

IMPORTANT: When folding the handle for

storage or transportation, be sure to fold the

handle as shown or you may damage the control cables.

•When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position.

Lower

Handle

Squeeze to fold

Hairpin

Cotter

Operator Presence

Control Bar ------..

Upper Handle _

_,_Fold Backward

		Mowing Position
	Fold Forward	Lower Handle
	For Storage	Lower Handle
	For Storage

ENGINE

FUELSYSTEM

IMPORTANT: It is important to prevent gum

deposits from forming in essential fuel system pads such as carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable aitemative in minimizing the fon nation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container Always follow the mix ratio found on stabilizer container Run engine at least 10 minutes after adding stabilizer to allow the stabiF=zerto reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER

•Remove spark plug.

•Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly a few times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•if possible, store your unit indoors and cover it to give protection from dust and did.

917.387402 specifications

The Craftsman 917.387402 is a versatile riding lawn mower designed to simplify lawn maintenance and enhance efficiency for homeowners. With its powerful engine and user-friendly features, this machine is ideal for tackling various yard sizes and terrains.

One of the standout features of the Craftsman 917.387402 is its robust 18.5 horsepower Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and tough weeds. The mower's automatic transmission allows for smooth speed adjustments without the hassle of shifting gears, ensuring a focused and steady mowing experience.

The cutting deck is another key characteristic of the Craftsman 917.387402. With a 42-inch cutting width, this mower is designed to cover substantial ground quickly and effectively. The deck features a multiple height adjustment setting, which allows the user to select the ideal grass length, accommodating varying lawn types and seasonal needs. The deck's design also helps to distribute grass clippings evenly, promoting a healthier lawn by allowing nutrients to return to the soil.

In terms of comfort and usability, the Craftsman 917.387402 offers a high-back seat that provides support during longer mowing sessions. The steering wheel is ergonomically designed, promoting less strain on the wrists and enhancing maneuverability. Additionally, the mower includes an easy-access fuel tank, so refueling is quick and straightforward.

Safety is a crucial aspect of the Craftsman 917.387402, which comes equipped with features such as an automatic shut-off system that activates when the operator leaves the seat. This ensures that the mower will not continue running unattended, significantly reducing the risk of accidents.

Moreover, the Craftsman 917.387402 showcases modern technological integrations such as an onboard diagnostic system that helps monitor the mower’s performance and maintenance needs. This feature alerts users to necessary maintenance tasks, ensuring the mower remains in top condition.

Ultimately, the Craftsman 917.387402 stands out for its combination of power, efficiency, comfort, and safety. Whether you're maintaining a small yard or a more extensive landscape, this riding mower offers the reliability and performance needed to achieve a pristine lawn with minimal effort. With its exceptional design and advanced features, the Craftsman 917.387402 is a commendable choice for any homeowner looking to invest in a dependable lawn care solution.