Muffler

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.)improve starting in cold weather, they will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of opera- tion orat least once a year if the lawn mower

is not used for 25 hours in one year. Check the crankcase oil level before

starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running en- gine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to re-

move any oil trapped inside of engine.

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil fill spout, stopping every few ounces to check the oil level with the dipstick.

6.Stop adding oil when you reach the

FULL mark on the dipstick. Wait a minute to allow oil to settle.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or engine will smoke heavily from the muffler on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100 hours of operation or every season, which- ever occurs first. Service air cleaner more often under dusty conditions.

TO CLEAN AIR FILTER

1.Loosen screw and tilt cover to remove.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur-

face. If very dirty, replace cartridge. ,I_CAUTION: Petroleum solvents, such

as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

4.Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely.

Back plate

Cartridge

Slot

Cover

Cover tab

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFIC-

ATIONS" section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass

and trash. Clean the underside of your mower after each use.

38527, 917.385270 specifications

The Craftsman 917.385270 and 917.38527 are robust riding lawn mowers designed to make lawn care easy and efficient for homeowners and landscaping professionals alike. These models are equipped with a host of features and technologies that enhance their performance, comfort, and durability.

One of the standout features is the powerful engine. Both models are equipped with a reliable Briggs & Stratton engine, known for its efficiency and longevity. With a displacement of around 19 horsepower, it offers enough power to handle a variety of mowing conditions, from flat lawns to hilly terrains. The engine is designed for easy starting and includes an automatic choke feature, reducing the hassle of manual adjustments.

The cutting deck is another highlight of the Craftsman 917.385270 and 917.38527. Featuring a 42-inch cutting width, these mowers can cover more ground with fewer passes, saving time during mowing sessions. The three-blade system provides an even cut and ensures that the grass is mulched finely, promoting a healthier lawn. Additionally, the height adjustment lever allows users to customize the cutting height easily, accommodating various grass types and seasonal growth cycles.

Comfort is key in any riding mower, and Craftsman has not overlooked this aspect. These models come with a spacious operator's seat that features armrests and a high back for enhanced support, reducing fatigue during longer mowing sessions. The control panel is user-friendly, featuring an ergonomic steering wheel and easy-to-reach controls, making operation intuitive even for novice users.

In terms of technology, the Craftsman 917.385270 and 917.38527 incorporate advanced safety features such as a seat safety switch that stops the blades when the operator leaves the seat. This ensures optimal safety while mowing, preventing accidents caused by unintended movements.

Durability is another characteristic that stands out. The steel frame construction ensures that the mower can withstand the rigors of regular use, whether in residential or commercial settings. Additionally, the heavy-duty tires provide excellent traction, contributing to better stability and control on uneven terrain.

In summary, the Craftsman 917.385270 and 917.38527 are exceptional riding mowers that blend power, efficiency, and comfort. With their advanced features, durable construction, and user-friendly design, they stand out as reliable tools for maintaining a beautiful and well-manicured lawn. Whether you are a homeowner or a landscaping professional, these mowers are designed to meet a variety of mowing needs with ease.