Engine, Carburetor, Handle, Fuel System

ENGINE

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to a Sears or other qualified service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your

lawn mower to a Sears or other qualified service center for repair and/or adjust- ment.

IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and experience to make any necessary adjustments.

Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire lawn mower (See "CLEANING" in the Maintenance sec-

tion of this manual).

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

HANDLE

You can fold your mower handle for storage.

1.Squeeze the bottom ends of the lower handle toward each other until the

lower handle clears the handle bracket, then move handle forward.

2.Loosen upper handle mounting bolts

enough to allow upper handle to be folded back.

IMPORTANT: When folding the handle for storage or transportation, be sure to fold it as shown oryou may damage the control cables.

•When setting up your handle from the storage position, the lower handle will automatically lock into mowing position.

SQUEEZE

TO FOLD

Operator		MOWING
		POSITION
control bar
	/ /7
	////
	/////// \
FOLD	-.-.. ,'/	\
FORWARD	/	Upper
FOR		handle
STORAGE.	_

Handle knob

Lower handle

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

S15

38527, 917.385270 specifications

The Craftsman 917.385270 and 917.38527 are robust riding lawn mowers designed to make lawn care easy and efficient for homeowners and landscaping professionals alike. These models are equipped with a host of features and technologies that enhance their performance, comfort, and durability.

One of the standout features is the powerful engine. Both models are equipped with a reliable Briggs & Stratton engine, known for its efficiency and longevity. With a displacement of around 19 horsepower, it offers enough power to handle a variety of mowing conditions, from flat lawns to hilly terrains. The engine is designed for easy starting and includes an automatic choke feature, reducing the hassle of manual adjustments.

The cutting deck is another highlight of the Craftsman 917.385270 and 917.38527. Featuring a 42-inch cutting width, these mowers can cover more ground with fewer passes, saving time during mowing sessions. The three-blade system provides an even cut and ensures that the grass is mulched finely, promoting a healthier lawn. Additionally, the height adjustment lever allows users to customize the cutting height easily, accommodating various grass types and seasonal growth cycles.

Comfort is key in any riding mower, and Craftsman has not overlooked this aspect. These models come with a spacious operator's seat that features armrests and a high back for enhanced support, reducing fatigue during longer mowing sessions. The control panel is user-friendly, featuring an ergonomic steering wheel and easy-to-reach controls, making operation intuitive even for novice users.

In terms of technology, the Craftsman 917.385270 and 917.38527 incorporate advanced safety features such as a seat safety switch that stops the blades when the operator leaves the seat. This ensures optimal safety while mowing, preventing accidents caused by unintended movements.

Durability is another characteristic that stands out. The steel frame construction ensures that the mower can withstand the rigors of regular use, whether in residential or commercial settings. Additionally, the heavy-duty tires provide excellent traction, contributing to better stability and control on uneven terrain.

In summary, the Craftsman 917.385270 and 917.38527 are exceptional riding mowers that blend power, efficiency, and comfort. With their advanced features, durable construction, and user-friendly design, they stand out as reliable tools for maintaining a beautiful and well-manicured lawn. Whether you are a homeowner or a landscaping professional, these mowers are designed to meet a variety of mowing needs with ease.