Mowing Tips

•To stop engine, release operator presence control bar. Wait until blade and all moving parts have stopped and turn fuel valve to OFF position if you do not intend to restart the engine soon.

Fuel Valve lever

•Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to

reduce ground speed and/or run the lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly.

•For better grass bagging and most cutting conditions, the engine speed should be set in the fast position.

•When using a rear discharge lawn mower in moist, heavy grass, clumps of cut grass may not enter the grass catcher. Reduce ground speed

(pushing speed) and/or run the lawn mower over the area a second time.

•If a trail of clippings is left on the right

side of a rear discharge mower, mow in a clockwise direction with a small

ovedap to collect the clippings on the next pass.

•Pores in cloth grass catchers can become filled with dirt and dust with

use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using.

•Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life.

MULCHING MOWING TIPS IMPORTANT: For best performance, keep mower housing free of built-up

grass and trash. See =Cleaning" in

MAINTENANCE section of this manual.

•The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biedegrade quickly to provide nutrientsfor the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recutting action of the blades.

•Avoid cutting your lawn when it is wet. Wet grass tends to form dumps and interferes with the mulching action. The best time to mow your lawn is the eady aftemcon. At this time the grass has dried and the newly cut area will not be exposed to the direct sun.

•For best results, adjust the lawn mower cutting height so that the lawn mower cuts off only the top one-thirdof the grass blades. If the lawn is overgrown it will be necessary to raise the height of cutto reduce pushing effort and to keep from overloading the engine and leaving clumps of mulched grass. For extremely heavy mulching, reduce your width of cut by overlapping previously cut path and mow slowly.

•Certain types of grass and grass condi- tions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mew across or perpendicular to the first cut path.

•Change your cutting pattem from week to week. Mow north to south one week then

change to east to west the next week. This

will help prevent matting and graining of the lawn.