Tires, Blade Care, To Remove Blade | Craftsman 917.385126 instruction

LUBRICATION CHART

(_ Wheel adjuster (on each wheel)

Engine oil

Discharge guard hinge pin

(_ Handle bracket mounting pins

_ Spray lubricant

See "ENGINE" in Maintenance section.

IMPORTANT: Do not oil or grease plastic

wheel bearings. Viscous lubricants will attract dust and dirt that will shorten the life of

the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

LAWN MOWER

Always observe safety rules when per- forming any maintenance,

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE

For best results, mower blade must be kept sharp. Replace a bent or damaged blade.

CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved

by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

3.Be sure trailing edge of blade (opposite sharp edge)is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

• The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

Blade adapter	Key	Crankshaft
		keyway
Lockwasher
Blade

Blade

bolt Hardened

washer Trailing edge Crankshaft

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure the blade is balanced. An unbalanced blade will cause

eventual damage to mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of

the straight nail exposed. Place center hole of blade over the head of the nail.

If blade is balanced, it should remain in

a horizontal position. If either end of the blade moves downward, sharpen the

11heavy end until the blade is balanced.

917.385126 specifications

The Craftsman 917.385126 is a versatile and reliable lawn tractor designed to provide an efficient mowing experience for homeowners with medium to large yards. Built for durability and performance, this model integrates several features and technologies that enhance its functionality and ease of use.

One of the notable characteristics of the Craftsman 917.385126 is its robust 19.5 horsepower engine, which delivers ample power for tackling various terrain types. The engine is paired with a 42-inch cutting deck, allowing users to cover more ground in less time. This combination provides a clean and precise cut, ensuring that your lawn looks its best with minimal effort.

The mower's cutting deck features five adjustable height settings, ranging from one to four inches, giving users the flexibility to choose the ideal grass height for their specific needs. This feature is particularly useful during different seasons as grass growth patterns change. Additionally, the deck is designed for easy maintenance, making it simple to clean and care for the mower.

Another standout feature of the Craftsman 917.385126 is its ease of maneuverability. The unit is equipped with a tight turning radius, allowing for more agility when navigating around obstacles such as trees, flower beds, and fences. This is especially beneficial for homeowners with intricately landscaped yards.

In terms of comfort, the Craftsman 917.385126 boasts an ergonomically designed seat that offers a comfortable riding experience during longer mowing sessions. The controls are intuitively placed, allowing for easy access and operation. Furthermore, the tractor comes with a dashboard that provides vital information about the mower’s performance, such as fuel levels and engine status.

The model also features a powerful transmission system designed for smooth operation and easy speed adjustments. Whether you need to move quickly across open areas or slow down for precision work, the transmission allows for seamless transitions.

Another important aspect is the mower's durability. Crafted with high-quality materials, the Craftsman 917.385126 is built to withstand regular use and the rigors of outdoor environments.

Overall, the Craftsman 917.385126 combines power, comfort, and innovation, making it a top choice for homeowners seeking a dependable and efficient lawn mowing solution. Its thoughtful features and robust characteristics ensure that it meets a wide array of lawn care needs with ease.