Craftsman 917.385126 manual To Start Engine, Mowing, Tips

Page 9

A CAUTION: Alcohol blendedfuels

(called gasoholor usingethanol or metha- nol) can attract moisturewhich leads to separationand formation of acids during storage. Acidic gas can damage the fuel system of an enginewhile in storage. To avoid engine problems,the fuel system should be emptied before storage of 30 days or longer. Emptythe gas tank, start the engine and let it run untilthe fuel lines and carburetorare empty. Use fresh fuel next season. See Storage Instructionsfor additional information. Never use engine or carburetorcleaner products in the fuel tank or permanentdamage may occur.

Engine oil cap

Primer

Gasoline filler cap

TO STOP ENGINE

To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the prod- uct and should be considered normal.

1.To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes.

2.Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

NOTE: In coolerweather it may be necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps.

MOWING

TIPS

 

 

 

 

_i, CAUTION:

Do not

use

de-thatcher

blade attachments

on

your

mower. Such

attachments

are

hazardous,

will

damage

your mower

and

could

void

your

warranty.

Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings.

It may also be necessary to reduce

ground speed and/or run the lawn mower over the area a second time.

For extremely heavy cutting, reduce the

width of cut by overlapping previously cut path and mow slowly.

For better grass bagging and most cut- ting conditions, the engine speed should be set in the FAST position.

For side discharge lawn mowers, cutting

in a counter-clockwise direction, start- ing at the outside of the area to be cut, spreads grass clippings more evenly and puts less load on the engine. To keep clippings off of walkways, flower beds, etc., make the first cuts in a clock- wise direction.

Pores in cloth grass catchers can be- come filled with dirt and dust with use

and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using.

Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life.

MULCHING MOWING TiPS

IMPORTANT: For best performance, keep mower housing free of built-up

grass and trash. See "CLEANING" in the

Maintenance section of this manual.

The special mulching blade will recut the grass clippings many times and reduce them in size so that as they fall onto the lawn they will disperse into the grass and not be noticed. Also, the mulched grass will biodegrade quickly to provide nutrients for the lawn. Always mulch with your highest engine (blade) speed as this will provide the best recut-

ting action of the blades.

,Avoid cutting your lawn when it is wet. Wet grass tends to form clumps and interferes with the mulching action. The best time to mow your lawn is the early

afternoon. At this time the grass has dried, yet the newly cut area will not be exposed to direct sunlight.

Image 9
Contents Craftsman Year Full Warranty on Craftsman Lawn Mower Maintenance ScheduleIV. Safe Handling of Gasoline Do notRJ19LM API SG-SL SAERepair Protection Agreements To Remove Mower from Carton To Install AttachmentsTo Unfold Handle LiftMeets Cpsc Safety Requirements ADD Gasoline To Start Engine MowingTips General Recommendations Before Each USELubrication Blade Care TiresTo Remove Blade To Replace BladeMuffler To Adjust Handle Squeeze To Adjust Rear DeflectorAwarning Discharge GuardLawn Mower Cylinder Problem CauseOther OFFCause Problem28-29 Operacion HacerNo Hacer SG-SL SAE SERVlClORendimiento DE LA Segadora Para Instalar LOS Accesorios Para Remover LA Segadora DE LA Caja DE CartonFamiliaricese CON SU Segadora Motor Velocidad DEL MotorOnsejos Para Segar Para Parar EL MotorMAX Antes DE Cada USOLubricacion Lubricacion TablaSegadora LlantasFiltro DE Aire MotorLimpieza Segadora Para Ajustar LA Altura DE CortePara Ajustar EL Mango Adelante Motor Velocidad DEL MotorMango Motor Sistema DE CombustibleProblema Causa Correccion Solucion ProblemasSolucion est dirigido ProblemaPage Xxx Engine Gasket SET Briggs & Stratton 4=CYCLE EngineReplacement Engine Emissions Label Repair Manual KEY Part Description NO. no KEY Part NO. no Description KEY Part NO. noService Notes Service Notes Need More HELP?

917.385126 specifications

The Craftsman 917.385126 is a versatile and reliable lawn tractor designed to provide an efficient mowing experience for homeowners with medium to large yards. Built for durability and performance, this model integrates several features and technologies that enhance its functionality and ease of use.

One of the notable characteristics of the Craftsman 917.385126 is its robust 19.5 horsepower engine, which delivers ample power for tackling various terrain types. The engine is paired with a 42-inch cutting deck, allowing users to cover more ground in less time. This combination provides a clean and precise cut, ensuring that your lawn looks its best with minimal effort.

The mower's cutting deck features five adjustable height settings, ranging from one to four inches, giving users the flexibility to choose the ideal grass height for their specific needs. This feature is particularly useful during different seasons as grass growth patterns change. Additionally, the deck is designed for easy maintenance, making it simple to clean and care for the mower.

Another standout feature of the Craftsman 917.385126 is its ease of maneuverability. The unit is equipped with a tight turning radius, allowing for more agility when navigating around obstacles such as trees, flower beds, and fences. This is especially beneficial for homeowners with intricately landscaped yards.

In terms of comfort, the Craftsman 917.385126 boasts an ergonomically designed seat that offers a comfortable riding experience during longer mowing sessions. The controls are intuitively placed, allowing for easy access and operation. Furthermore, the tractor comes with a dashboard that provides vital information about the mower’s performance, such as fuel levels and engine status.

The model also features a powerful transmission system designed for smooth operation and easy speed adjustments. Whether you need to move quickly across open areas or slow down for precision work, the transmission allows for seamless transitions.

Another important aspect is the mower's durability. Crafted with high-quality materials, the Craftsman 917.385126 is built to withstand regular use and the rigors of outdoor environments.

Overall, the Craftsman 917.385126 combines power, comfort, and innovation, making it a top choice for homeowners seeking a dependable and efficient lawn mowing solution. Its thoughtful features and robust characteristics ensure that it meets a wide array of lawn care needs with ease.