Assembly, Toremovechipper-Shredderfromcarton

r._i7

ASSEMBLY

Flat ---_/t_

Washer [ _ ) ]

5/16" I.D.

HeX Lock

ut 5/16-18

Thread

INSTRUCTnONS

IMPORTANT: This unit is shipped WITHOUT GASO- LINE or OIL After assembly, see operation section of

this manual for proper fuel and engine oil recommen- dations.

NOTE: To determine right and left hand sides of your chipper-shredder, stand behind and face the hopper (engine is at the front of the unit).

Your chipper-shredder has been completely assem- bled at the factory, except for the hopper assembly (hopper hood and upper leaf ramp section have been sub-assembled), upper guide assembly, chute deflec- tor and the catcher bag. The hardware pack and safe- ty glasses are also included in the carton.

The hardware pack contains the parts shown in figure 1 (shown full size).

Hex Bolt

•,,----5/16-18x 8-3/8" Long

TOREMOVECHIPPER-SHREDDERFROMCARTON

Cut the corners of the carton Remove all packing inserts. Roll chipper-shredder out of the carton Make certain all parts and literature have been removed before the carton is discarded,

TOOLSREQUIREDFORASSEMBLY

(1) Phillips Screwdriver

(2) 1/2" or Adjustable Wrenches

(2) 7/16" or Adjustable Wrenches

.oxLock.ats

_=VJ V_

1/4-20 Thread

_=:

FIGURE 1.