Craftsman 917.377422 owner manual Discharge Guard, Rear Deflector, To REMOVE/REPLACE Drive Belt

Page 13

ACAUTION: Before performing any service and adjustments:

Release control bar and stop engine.

Make sure the blade and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST Cut-rING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in

the Operation section of this manual.

DISCHARGE GUARD

The discharge guard, attached to the discharge opening of your lawn mower, is provided to prevent the possibility of injury resulting from objects being thrown out of the discharge opening into the operator mowing position. If the discharge guard becomes damaged, it should be replaced.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

TO REMOVE/REPLACE DRIVE BELT

Remove drive cover. Remove belt by pushing down on gear case pulley and rolling belt off it.

Turn lawn mower on its side with carburetor and fuel cap up.

Remove blade.

Remove debris shield.

Remove belt from engine pulley on crankshaft.

Install new belt by reversing above steps.

Always use factory approved belt to assure fit and long life.

Drive cover

Push down

TO ADJUST HANDLE

Your lawn mower handle can be raised or lowered for your mowing comfort. Four

(4)positions are available: high, medium high, medium low and low. Handles are shipped mounted in the medium low position.

To change from medium low to medium high position, the upper and lower handle sections will have to be turned over.

Remove the cable clips.

Remove the controls and operator presence control bar from the upper handle.

Remove the starter rope guide from the upper handle.

Remove hairpin cotters.

Disconnect the lower handle from the handle brackets.

Turn the handle over and reassemble

the hairpin cotters that have been removed.

Reassemble the starter rope guide.

Reassemble the controls and the

operator presence control bar to the upper handle.

_,CAUTION: The operator presence control bar must pivot freely to permit blade/brake engagement when control bar is released. Do not overtighten the

fasteners holding the controls to the upper handle.

ShippingPosition

Medium low

Medium high

13

Image 13
Contents Seam, Roebuck and Co., Hoffman Estates, IL CraftsmanTraining Limited TWO Yeaf Warranty on Craftsman Power MowerPreparation Operation Maintenance and StorageHOW to SET UP Your Lawn Mower To Unfold Handle Lawn Mower MaintenanceLawn Mower Performance To Remove Lawn Mower from CartonYourlawnmowerhandlecan be Meets Cpsc Safety RequirementsKnow Your Lawn Mower To Install Discharging Deflector HOW to USE Your Lawn Mower Engine Speed ControlEngine Zone Control Drive ControlGAS Before Starting Engine OILMowing Tips Mulchingmowingtips Before Each USE Lubrication ChartLubrication SectionModel Number Serial Number Date of Purchase Horsepower DisplacementOIL Capacity Champion RJ19LM or J19LM Valveclearance IntakeIMPORTANTBladeboltisgrade8 heat treated Over Fill CleaningAIR Filter To Change AIR FilterDischarge Guard To Adjust HandleRear Deflector To REMOVE/REPLACE Drive BeltCarburetor Engine Engine SpeedHandle Chart Cause Troubleshooting ProblemEngine Fuel System Engine OILLossof power Troubleshooting Chart Problem CausePage Sears

917.377422 specifications

The Craftsman 917.377422 is a versatile and reliable lawn tractor designed for homeowners who seek efficiency and performance in their lawn care routine. This model stands out due to its powerful features, innovative technologies, and robust characteristics that make it suitable for a variety of yard sizes and terrains.

At the heart of the Craftsman 917.377422 is its potent 19.5 horsepower Briggs & Stratton engine. This engine is well-known for its durability and ease of maintenance, allowing users to tackle even challenging mowing tasks with confidence. The engine’s design offers optimal performance, enabling the tractor to operate smoothly across different speeds and terrains, thus providing a superior mowing experience.

One of the standout features of this model is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and coverage, ensuring users can navigate tight spaces while still efficiently mowing larger areas. The cutting deck is made from reinforced steel, which enhances durability and ensures a clean cut every time.

The Craftsman 917.377422 is equipped with a six-position height adjustment system, allowing users to customize the cutting height based on the grass type and desired look. This versatility ensures that homeowners can maintain their lawns in the way that suits their needs best, from a manicured appearance to a more natural look.

In terms of technology, the tractor features a comfortable, high-back seat designed to reduce fatigue during longer mowing sessions. The ergonomic controls are intuitively placed, allowing for easy operation, making it accessible for users of all skill levels. Additionally, its tight turning radius enhances maneuverability, making it easier to navigate around obstacles and flower beds.

Another key characteristic of the Craftsman 917.377422 is its robust build quality. Crafted with high-quality materials, this lawn tractor is designed to endure the rigors of regular use, ensuring longevity and reliability season after season. Furthermore, the rear-wheel drive offers superior traction, making it adept at tackling hilly terrain with ease.

In conclusion, the Craftsman 917.377422 is an exceptional lawn tractor that combines power, efficiency, and comfort. Its features make it an invaluable tool for homeowners looking to maintain their lawns effortlessly while enjoying the process. The blend of advanced technology and thoughtful design characteristics makes this model a worthy investment for any lawn care enthusiast.