Craftsman 917.377422 HOW to USE Your Lawn Mower Engine Speed Control, Engine Zone Control

Page 6

Theoperationofanylawnmowercan resultin

foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjust- ments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR LAWN MOWER ENGINE SPEED CONTROL

The engine speed was set at the factory for optimum performance. Speed is not adjustable.

ENGINE ZONE CONTROL

ACALmON: Federal regulations require an

engine controlto be installed on this lawn mower in order to minimize the risk of blade

contact injury.Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which requires the operator to be pos'fdoned behind the lawn mower handle to start and

operate the lawn mower.

DRIVE CONTROL

•Serf-propelling is controlled by holdingthe operator presence control bar down to the handle and pushing the drive control lever forward until itdicks; then release the lever.

•Forward motion will stop when the operator presence control bar is released. To stop forward motion without stopping engine, release the operator presence controlbar slightlyuntilthe drive control disengages. Hold operator presence control bar down to handle to continue mowing without self- propelling.

•To keep drive control engaged when fuming comers, push down on handle and liftfront wheals off ground while turning lawn mower.

Operator presence control

Drive

bar -,.

_ \

. _

control

TO ADJUST cuTriNG HEIGHT

•Raise wheels for low cut and lower wheels for high cut,

•Adjust cutting height to suit your require- ments. Medium position is best for most lawns.

•To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels am in the same setting.

NOTE: Adjuster is properly positioned when plate tab insertsinto hole in lever. Also, 9- positionadjusters (if so equipped) allow lever to be positioned between the plate tabs.

Lowerwheels for Plate tab high cut

Raise wheels for low

NOTE: Your lawn mower has been shipped ready for mulching operation. To convert to discharging operation, you must install the discharge deflector attachment included with your mower.

TO INSTALL DISCHARGING DEFLECTOR

•Lift door upward on it'shinge until the deflector frame can be hooked over the door mounting bracket as shown.

•Release the door to rest against deflector frame.

•To retum to mulching operation, reverse the above steps and be sure door is in closed position.

Deflector _.__,_'-"

Mulcher Door

 

 

Mounting

 

 

Bracket

ACAUTION:

Do not operate

your lawn

mower without mulcher door in closed position, discharge deflector in place, or approved grass catcher in place.

To engage ddve control

disengaged

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Craftsman Seam, Roebuck and Co., Hoffman Estates, ILLimited TWO Yeaf Warranty on Craftsman Power Mower TrainingPreparation Maintenance and Storage OperationLawn Mower Performance Lawn Mower MaintenanceHOW to SET UP Your Lawn Mower To Unfold Handle To Remove Lawn Mower from CartonMeets Cpsc Safety Requirements Yourlawnmowerhandlecan beKnow Your Lawn Mower Engine Zone Control HOW to USE Your Lawn Mower Engine Speed ControlTo Install Discharging Deflector Drive ControlBefore Starting Engine OIL GASMowing Tips Mulchingmowingtips Lubrication Lubrication ChartBefore Each USE SectionOIL Capacity Serial Number Date of Purchase Horsepower DisplacementModel Number Champion RJ19LM or J19LM Valveclearance IntakeIMPORTANTBladeboltisgrade8 heat treated AIR Filter CleaningOver Fill To Change AIR FilterRear Deflector To Adjust HandleDischarge Guard To REMOVE/REPLACE Drive BeltEngine Engine Speed CarburetorHandle Engine Fuel System Troubleshooting ProblemChart Cause Engine OILTroubleshooting Chart Problem Cause Lossof powerPage Sears

917.377422 specifications

The Craftsman 917.377422 is a versatile and reliable lawn tractor designed for homeowners who seek efficiency and performance in their lawn care routine. This model stands out due to its powerful features, innovative technologies, and robust characteristics that make it suitable for a variety of yard sizes and terrains.

At the heart of the Craftsman 917.377422 is its potent 19.5 horsepower Briggs & Stratton engine. This engine is well-known for its durability and ease of maintenance, allowing users to tackle even challenging mowing tasks with confidence. The engine’s design offers optimal performance, enabling the tractor to operate smoothly across different speeds and terrains, thus providing a superior mowing experience.

One of the standout features of this model is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and coverage, ensuring users can navigate tight spaces while still efficiently mowing larger areas. The cutting deck is made from reinforced steel, which enhances durability and ensures a clean cut every time.

The Craftsman 917.377422 is equipped with a six-position height adjustment system, allowing users to customize the cutting height based on the grass type and desired look. This versatility ensures that homeowners can maintain their lawns in the way that suits their needs best, from a manicured appearance to a more natural look.

In terms of technology, the tractor features a comfortable, high-back seat designed to reduce fatigue during longer mowing sessions. The ergonomic controls are intuitively placed, allowing for easy operation, making it accessible for users of all skill levels. Additionally, its tight turning radius enhances maneuverability, making it easier to navigate around obstacles and flower beds.

Another key characteristic of the Craftsman 917.377422 is its robust build quality. Crafted with high-quality materials, this lawn tractor is designed to endure the rigors of regular use, ensuring longevity and reliability season after season. Furthermore, the rear-wheel drive offers superior traction, making it adept at tackling hilly terrain with ease.

In conclusion, the Craftsman 917.377422 is an exceptional lawn tractor that combines power, efficiency, and comfort. Its features make it an invaluable tool for homeowners looking to maintain their lawns effortlessly while enjoying the process. The blend of advanced technology and thoughtful design characteristics makes this model a worthy investment for any lawn care enthusiast.
Top Page Image Contents