3. Assembly
GB
2
1
IMPORTANT INFORMATION
When received from the Manufacturer, the wheels are in a raised position. Do not switch on the product before removing from the raised 1 position into position 5 2 .
Assembling the lower handle to the lawnmower
13
2b
5
4a 8 ✓
5a
9
611
2a 4
3
6
7
4b 8 ✖
5b
x3
10
1.Pull the lower handle bolt 3 until it locks into position.
2.Place the Spring 4 and the Pivot Block 5 over the Bolt
Repeat for the other side.
3.Insert the Barrel Nut 6 into the Cam Lock 7 .
4.Ensuring the Lower Handle is in the correct position 8 , insert the
Lower Handle on to the Bolt until it is firmly fitted into the Pivot Block.
5.Place the Washer 9 and Cam
Lock on to the Bolt and turn the Cam Lock 3 times clockwise 10.
6.Fold down the Cam Lock towards the handle 11. If the
Cam Lock isnʼt tightened: open the Cam Lock, turn the Cam Lock one more time and fold
down the Cam Lock until the handle 11 is secure.
14