Craftsman 79938 UNIT/MAINTENANCE Safety, Maintain the unit acoording to recom- mended procedures

insulationconstructiontobecome inef-

fective and result in sedous injury,

UNIT/MAINTENANCE SAFETY

•Turn off all controls and allow the mo- tor to stop before disconnecting the unit from the power source.

•Disconnect the unit from the power source when not in use. Do not leave the unit when it is plugged into outlet,

•Do not set the unit on any surface ex- cept a clean, hard area while the unitis running. Debris such as gravel, sand, dust, grass, etc,, could be picked up by the air intake and thrown out through the discharge opening, dam- aging the unit, property, or causing se- rious injury to bystanders or operator,

•Do not overreach or use from unstable surfaces suoh as ladders, trees, steep slopes, rooftops, etc. Use extra care when oleanlng on stairways, Keep firm footing and balance at all times, Keep hands out of tubes.

•Inspect theentire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is in proper working order.

•Disconnect unit from power source before servicing, cleaning, performing maintenance, or storing,

This unit is Double Insulated, Seethe "DOUBLE INSULATION"section. Have all internal service performed by quali- fied service repair personnel to avoid creating a hazard or voiding your war- ranty.

•Have all maintenance other than the recommended procedures described in the Operator's Manual performed by your Sears Service Center.

•Always see your Sears Service Cen- ter to replace a damaged impeller. Parts that are chipped, cracked, bro- ken, or damaged in any other way can fiy apart and cause serious injury. Re- place damaged parts before using the unit

•Never place any object Intheair intake opening as this couJd restrict proper airflow and cause damage to the unit.

•Never douse the unit with water or oth- er liquids or squirt with a water hose Clean with a damp sponge and mi_d soap. See "STORAGE."

•Check air intake openings and tubes frequently, always with the unit stopped and power source disoon- nested. Keep vents and tubes free ol debris which can accumulate and re- strict proper air flow,

•Do notbum, incinerate, or expose this unit to extreme heat.

•Store the unit unplugged in a high, cool, dry, indoor area out of the reach of children.

•Use only recommended attachments and replacement parts to avoid creat- ing a hazard and]or voiding warranty.

•Maintain the unit acoording to recom- mended procedures,

•Use only for jobs explained in this manual.

BLOWER SAFETY

•Use only in daylight or in good artificial light.

•Inspect the area before using the unit, Remove all debris and hard objects suoh as rocks, glass, wire, etc,, that can ricochet, be thrown, or otherwise cause injury or damage.

•Avoid accidental starting. Be sure the switch is in the OFF position and keep your hand and fingers away from the switch while connecting the unit to the power source or when carrying a unit connected to the power source.

•Never run the unit without the proper equipment attaohed, When used as a blower, always install a blower tube, Use only recommended attachments.

Do not use with any opening blocked, Keep free of dust, lint, hair and any- thing that may reduce air flow,

•To avoid spreading fire, do not use blower near leaf or brush fires, fire- places, barbecue pits, ashtrays, etc.

•Never place objects inside the blower tubes; aN_ays direct the blowing de- bris away from people, animals, glass, and solid objects such as trees, auto- mobiles, walls, etc. The force of air can cause rooks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage.

•Never use for spreading chemicals, fertilizers, or any other substances which may contain toxic materials.

VACUUM SAFETY

•Stop the motor and disconnect the power source before opening the air inletdoor or attempting to insert or re- move the vacuum tubes, The motor must be stopped and the impeller

blades no longer turning to avoid seri- ous injury from the rotating blades.

•Hard objects can be thrown through the coIJectionbag or the housing and become dangerous missiles which can cause serious Injury to the opera- tor or others.

•When using the vacuum attachment, the unit is designed to pick up dry ma- terial such as leaves, grass, smell

4