If you | need assistance, contact your | Failure to follow all Safety Rules and |
Sears | Service Center or call | Precautions can result in serious injury. |
| ||
| SAVE THESE | INSTRUCTIONS |
CARTON CONTENTS
Model 358.799341
•Blower
•Blower Tube
•Nozzle
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find
parts missing or damaged, call
£= ____.__
4_ILWARNING: If received as-
sembled, ensure your unit is properly assembled and all fasteners are secure.
ATTACHING THE BLOWER TUBE AND NOZZLE
1.Insert the blower tube into the blow- er outlet.
2.Twist the blower tube clockwise until it is firmly seated in the blower outlet.
3.Twist the nozzle into the end of the
blower tube until it is firmly seated. Make sure the nozzle end points upward as shown in the following illustration.
Blower outlet
require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If plug does not fit fully into the wall outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.
The extension cord used to reach the power source must be:
•Specifically marked as suitable for out- door use. The cord must be marked with the suffix
•Heavy enough to carry current from the power source the full length of ex- tension cord to the unit. Otherwise, loss of power and overheating can oc- cur causing damage to unit. Refer to table for minimum wire gauge recom- mendations. The cord must be marked with the proper wire gauge. (Appropriate extension cords are avail- able at Sears.) Do not use multiple cords.
•In good condition. Cord insulation must be intact with no cracks or deterioration. Plug connectors must be
undamaged. DO NOT use multiple cords.
MINIMUM WIRE GAUGE
RECOMMENDATIONS
VOLTS 25 FT. | 50 FT. | 100 FT. |
Blower Tube Nozzle
SELECT AN EXTENSION CORD
Use only a 120 A.C. voltage supply as shown on nameplate of the unit to power your blower.
•To reduce the risk of electrical shock, this equipment has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will
_ | 16 | 14 |
| A.W.G * | A.W.G * |
•American Wire Gauge
Secure the extension cord to the unit by tying the cord onto the cord retainer. In- sert the cord receptacle in to the re- cessed plug.
Cord
Receptacle
Recessed
Plug on Unit
5