CUSTOMER RESPONSIBILITIES
CARE & MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and labels
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have been subjected to oper- ator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit.
BEFORE EACH USE
CHECKFORLOOSE
FASTENERS AND PARTS
•BlowerTube
•Nozzle
WHEN TO PERFORM
Before each use
Before each use
After each use
CHECK FOR DAMAGED OR
WORN PARTS
Contact Sears Service Center for re- placement of damaged or worn parts.
• ON/OFFSwitch - Ensure switch func- tions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue.
AFTER EACH USE
INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord.
•Inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth with a mild detergent.
•Wipe off unit with a clean dry cloth.
USER REPLACEABLE SERVICE PARTS |
| |
REPLACEMENT PART | PART NUMBER | |
Blower | Tube and Nozzle | 530403682 |
Gutter | Kit | |
Safety | Glasses | |
Extension Cord | ||
d_WARNING: Perform the follow- ing steps after each use:
•Stop unit and disconnect from the power source.
•Store the unit in a stable location.
•Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause in ury.
•Store unit well out of the reach of chil- dren.
Prepare unit for storage at the end of the season or if it will not be used for
30 days or more.
BLOWER STORAGE
•Disconnect from the power source.
•Clean the entire unit.
•Inspect the blower and all tubes.
•Clean air vents and air inlet of debris.
•Store your unit and extension cord in a well ventilated area and covered, if possible, to prevent dust and dirt accu- mulation. Do not cover with plastic. Plastic cannot breathe and may cause condensation and eventual rust or cor- rosion.
•Check entire unit for loose screws. Re- place any damaged, worn, or broken parts.
7