Know Your Backpack AIR Blower

then tighten the multi-functionhandle to blower with the two screws (Fig. 3, H).

FIGURE 3

4.Once the handle is secured, the blower tube with - handle can be twisted and swiveled. Ensure that

the throttle cable does not become pinched or trapped when swiveling handle.

.5. Installthe extension tube (if desired) onto blower tube by aligningthe tab on the extension with the correspondingarea on blower tube; then push togetherand twist to secure.

6.Installthe curved nozzle tube in the same manner. Twist to secure.

Read this Operator'sManual and Safety Instructionsbefore operatingyour backpack air blower. Compare the illustrationbelow (Figure 4) with your backpack air blower to familiarize yourselfwith the locationof various controls and adjustments. Save this manual for future reference.

1.	On-off switch	12.	Anti-vibrationsprings
2.	Throttle lever	13.	Quick release carryingstrep
3.	Speed lever	14.	Carryingstrap
4.	Pdmer	15.	Carryingfreme
5.	Choke lever	16.	Pleated tube
6.	Airfilter cover	17.	Blower tube
7.	Fuel tank cap	18.	Extensiontube
8.	Starter rope handle	19.	Curved nozzletube
8.	Starter rope handle	20.	Blowerhousing
9.	Spark plug	20.	Blowerhousing
10.	Muffler	21.	Clamp
11.	Carburetor adjustment screws	22.	Clamp with cable guide

FIGURE 4