Craftsman 358.35181 manual Tool8 required

Page 17

Replace the spark arresting screen if breaks occur.

Spark Exhaust

Arresting Outlet

Screen Cover

z

Nut

Muffler

CLEANING THE SPARK ARREST- ING SCREEN

Cleaning is required every 25 hours of

operation or annually, whichever comes first.

1.Loosen and remove the nut from the exhaust outlet cover.

2.Remove the exhaust oulet cover.

3.Remove spark arresting screen. Handle screen carefuIty to prevent damage.

4.Clean the spark arresting screen

gently with a wire brush. Replace screen if breaks are found.

5.Replace any broken or cracked muffler parts,

6.Reinstall spark arresting screen, ex- haust outlet cover, and nut. Tighten nut securely.

REPLACE SPARK PLUG

The spark plug should be replaced each year to ensure the engine starts easier and runs better. Ignition timing is fixed and nonadjustable.

,_b, WARNING: Disconnect the

spark plug before performing mainte- nance, service, or adjustments except for carburetor adjustments.

CHAIN SHARPENING

_I_WARNING: Improper chain

sharpening techniques and/or depth gauge maintenance will increase the chance of kickback which can result in serious injury.

_ WARNING: Wear protective

gloves when handling chain. The chain is sharp and can cut you even when it is

not moving.

Conditions which indicate the need for chain sharpening:

1.Loosen 3 screws on cylinder cover.

2.Remove the cylinder cover.

3.Pull offthe spark plug boot.

4.Remove spark plug from cylinder and discard.

5.Replace with Champion RCJ-7Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench, Spark plug gap should be 0,025 inch (0,6 mm),

6, Reinstall the spark plug boot.

7, Reinstall the cylinder cover and 3 screws. Tighten securely,

Cy}inder

Cover

Spark

Plug Boot

Spark

Plug

REPLACE FUEL FILTER

To replace fuel filter, drain your unit by running it dry of fuel. Remove fuel cap and its connected retainer from tank.

Puit filter from tank and remove from line. Replace and reassemble.

•Reduction in size of wood chips, The size of the wood chip wilt decrease as the chain gets duller until it be- comes more like a powder than a chip. Note that dead or rotted wood will not produce a good chip.

•Saw cuts to one side or at an angle,

•Saw has to be forced through the cut.

Tool8 required:

•5/32 inch (4 mm) diameter round file and file holder

•Flat file

•Depth gauge tool

TO SHARPEN CHAIN:

1.Move ON/STOP switch to the STOP position.

2.Check chain for proper tension.

Adjust chain tension if necessary. See CHAIN TENSION section.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Gasoline Chain SAW Plan Ahead ONE Year Full Warranty on Craftsman GAS Chain SAWMaintain Your SAW in Good Working Order Carburetor AdjustmentHandle Fuel with Caution Guard Against KickbackAvoid Putl-ln Reduce the Chance KickbackAvoid Pinch-Kickback WE do not REP Chain BrakeModel Carton ContentsAssembly CHOKE/FAST Idle Lever ON/STOP SwitchChain Tension Primer BulbFueling Engine Guide BAR and Chain OILStopping Your Engine Starting PositionDifficult Starting or 8tatting a flooded engine Starting a Warm EngineOperating Tips Braking function controlInertia activating function control Felling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Hinge holds tree on stump and helps control fallCutting a Fallen Tree Bucking Bucking Using a LOG or Support StandImportant Points Types of Cutting Used for BuckingLimbing and Pruning Iiwarning Using a support standLimbing PruningResponsibilities Check Guide BAR Hand tighten onlytCheck Chain Sharpness Inspect and Clean Unit and Decals Clean AIR FilterCheck Chain Brake Check Fuel Mixture LevelTool8 required To Replace Chain Chain ReplacementJustment Chain AdjustmentLoosen Fuel System Seasonal StorageEngine OtherRemedy Troubleshooting TableTrouble Cause Remedy TroubleOff-road engine is purchased. Length of Coverage This war Your Warranty RightsWhat is Covered Repair or MAINTENANCE, Replacement and Repair Repair Parts Sears CHAtNSAW Model

358.35181 specifications

The Craftsman 358.35181 is a reliable and versatile gas-powered string trimmer designed for both homeowners and professionals looking to maintain their yards and gardens. This robust tool is well-regarded for its efficiency, ease of use, and advanced features, making it an excellent choice for tackling weeds, grass, and overgrown areas.

One of the standout features of the Craftsman 358.35181 is its powerful 25cc 2-cycle engine. This engine delivers a strong performance, allowing users to trim and edge with ease. It is designed to provide effective cutting while minimizing fuel consumption, ensuring that users can work longer without frequent refueling. The quick-start technology associated with this engine allows for easier starting, even in cold conditions, which is particularly beneficial for those who live in regions with varying climates.

Equipped with a 17-inch cutting width, the Craftsman 358.35181 enables users to cover more ground in a single pass, making yard maintenance quicker and more efficient. The trimmer features a dual-line bump head, allowing for easy line advancement with a simple tap on the ground. This feature saves time and effort, so users can focus on the task at hand without wasting precious minutes.

Another notable characteristic of the Craftsman 358.35181 is its lightweight design. Weighing in at around 10.5 lbs, it is manageable for extended periods of use without causing excessive fatigue. The ergonomically designed handle offers comfort and control, enabling precision in trimming along edges and around delicate landscaping.

The Craftsman 358.35181 also comes with a variety of attachments that enhance its functionality. These versatile attachments can transform the trimmer into multiple yard maintenance tools, including a cultivator, blower, or pole saw, which extends the usability of the device.

Safety features such as the protective guard and throttle control contribute to an overall secure operation when using the device. Craftsman's commitment to durability means the trimmer is constructed with high-quality materials designed to withstand the rigors of regular use.

Overall, the Craftsman 358.35181 stands out as a reliable and efficient string trimmer that combines power, performance, and versatility, making it an excellent addition to any homeowner or professional landscaper's tool collection. Whether for maintaining a small garden or tackling larger projects, this trimmer is ready to meet the challenge.
Top Page Image Contents