Maintenance Schedule Care and Maintenance Task

	1.	Loosen	the depth adjustment		knob.
{qi	2. Slide the wheel to the desired posi-
		tion.
		• Raising the wheel will increase
		the cutting		depth.
		• Lowering the wheel will decrease
		the cutting		depth.
	3.	Tighten	the depth adjustment		knob

securely.

MAINTENANCE SCHEDULE

_l_ WARNING: Always stop unit and disconnect spark plug wire (or discon- nect powerhead from power source) before performing maintenance.

CARE AND MAINTENANCE TASK

Check for loose fasteners and parts Check for damaged or worn parts Inspect and clean unit and decals Check or replace blade

_ENERAL RECOMMENDATIONS

The warranty on this attachment does not cover items that have been sub- jected to operator abuse or negli-

gence, To receive full value from the warranty, the operator must maintain the edger attachment as instructed in this manual,

CHECK FOR LOOSE

FASTENERS AND PARTS

,Blade nut * Fasteners

CHECK FOR DAMAGED OR

WORN PARTS

Contact Sears Service Centre for re- placement of damaged or worn parts. * Blade Shield - Discontinue use of edger if blade shield is damaged.

INSPECT AND CLEAN UNIT AND DECALS

*After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

*Wipe off unit with a clean dry cloth.

WHEN TO PERFORM

Before each use

After each use

Every 5 hours of operation

BLADE MAINTENANCE

_WARNING: The blade will con-

tinue to spin after the engine stops or after the throttle trigger has been re-

leased. To avoid serious injury, make sure the blade has stopped coasting

and disconnect the spark plug (or dis- connect powerhead from power source) before performing work on the blade.

_I_WARNING: Always replace a blade that is bent, warped, cracked, broken, or damaged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear protective gloves when handling or performing maintenance on the blade to help

avoid injury.

•The blade is reversible. When the cutting edge on one side becomes worn, turn the blade over (see BLADE REPLACEMENT in the SER- VICE AND ADJUSTMENTS section).

•Check blade for flatness periodically. Lay the blade on a flat surface to in- spect for flatness. Throw away a blade that is not flat.

51157, C944.511571 specifications

The Craftsman C944.511571,51157 is a versatile and powerful tool designed for both DIY enthusiasts and professional users. This innovative device offers an array of features that enhance functionality, making it a valuable addition to any workshop or garage.

One of the standout features of the Craftsman C944.511571,51157 is its robust motor, which delivers high performance for a wide range of applications. Whether you're cutting, drilling, or sanding, the powerful motor ensures that tasks are completed efficiently and effectively. The device is engineered to provide consistent power output, allowing for smooth operation even under load.

The design of the Craftsman C944.511571,51157 is focused on user comfort and ease of use. It boasts an ergonomic grip that reduces fatigue during extended use, making it suitable for long projects. The lightweight construction ensures that users can maneuver the tool easily, while the compact design allows for storage in tight spaces.

This tool incorporates advanced technology that enhances its performance. One such technology is the variable speed control, which allows users to adjust the speed according to the material and task at hand. This feature is particularly beneficial for detailed work where precision is key. Additionally, the tool includes a built-in safety switch to prevent accidental starts, offering peace of mind to users.

Durability is another key characteristic of the Craftsman C944.511571,51157. Constructed with high-quality materials, this tool is designed to withstand the rigors of regular use. The housing is resistant to wear and tear, and the components are built to last, ensuring that users get a reliable tool that stands the test of time.

The versatility of the Craftsman C944.511571,51157 is evident in its compatibility with a range of attachments and accessories. This adaptability allows users to tackle a variety of tasks with ease, from woodworking and metalworking to general home maintenance. The tool provides the flexibility needed to switch between tasks, making it a multi-functional device.

In conclusion, the Craftsman C944.511571,51157 is a well-rounded tool that combines power, comfort, and durability. Its advanced technologies, ergonomic design, and versatility make it an essential tool for any DIY enthusiast or professional. Whether you're a seasoned pro or just starting, this tool is equipped to meet a variety of needs, making it a smart investment for anyone looking to enhance their toolkit.