CLEANING
•Clean engine, battery, seat, finish, etc. of all foreign matter.
•Clean debris from steering plate.
Debris can restrict clutch/brake pedal
shaft movement, causing belt slip and loss of drive.
_i, CAUTION: Avoid all pinch points and
movable parts
Clutch/brake pedal
Clean top
Steering
Plate
Sieering | System, Dash, | _'_ Pinch |
' | and Mower Not Shown | |
Fender | Points |
•Keep finished surfaces and wheels free of all gasoline, oil, etc.
•Protect painted surfaces with automo- tive type wax.
We do not recommend using a garden hose or pressure washer to clean your tractor
unless the engine and transmission are covered to keep water out. Water in engine
or transmission will shorten the useful life of
your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.
DECK WASHOUT PORT
Your tractor's deck is equipped with a wash- out port on its surface as part of its deck wash system. It should be utilized after each use.
1.Drive the tractor to a level, clear spot on your lawn, near enough to a water
spigot for your garden hose to reach.
iMPORTANT: Make certain the tractor's
discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.
2.Make sure the attachment clutch control
is in the "DISENGAGED" position, set the parking brake, and stop the engine.
3.Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose.
4.Pull back the lock collar of the nozzle adapter and push the adapter onto the
deck washout port at the left end of the mower deck. Release the lock collar to
lock the adapter on the nozzle.
Nozzle |
|
Ada | Washout Port |
|
iMPORTANT: Tug hose ensuring connec- tion is secure.
5.Turn the water on.
6.While sitting in the operator's position on the tractor,
iMPORTANT: Recheck the area making certain the area is clear.
7.Move the tractor's attachment clutch con- trolto the"Engaged" position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned.
8.Move the tractor's attachment clutch
control to the "DISENGAGED" posi- tion. Turn the ignition key to the STOP
position to turn the tractor's engine off. Turn the water off.
9.Pull back the lock collar of the nozzle
adapter to disconnect the adapter from the nozzle washout port.
10.Move the tractorto a dry area, preferably a concrete or paved area. Place the at- tachment clutch control in the "Engaged"
position to remove excess water and to _L, help dry before putting the tractor away.
WARNING: A broken or missing washout
fitting could expose you or others to thrown objects from contact with the blade.
•Replace broken or missing washout fitting immediately, prior to using mower again.
•Plug any holes in mower with bolts and Iocknuts.
21
