Keys
Slope Sheet
(1) Oil Drain Tube
For Future Use
(2) Keys
Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes. |
| |||
TOOLS | REQUIRED | FOR ASSEMBLY | ||
A socket wrench set will make assembly | ||||
easier. Standard wrench sizes are | listed. | |||
(1) | 1/2" | wrench | Tire pressure | gauge |
(2) | 7/16" | wrenches | Utility knife | LABEL |
Pliers
When right or left hand is mentioned in this manual, itmeans when you are in the operating position (seated behind the steering wheel).
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
•Remove all accessible loose parts and parts cartons from carton.
•Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.
•Check for any additional loose parts or cartons and remove.
ADJUST SEAT
1.Sit in seat.
2.Lift up adjustment lever (A) and slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.
3.Release lever to lock seat in position.
BEFORE REMOVING TRACTOR
FROM SKiD
CH ECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at
7