REPLACING BATTERY

_ILWARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift hood to raised position.

2.Disconnect BLACK battery cable (A) then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable (B) to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely. Slide terminal cover (C) over terminal.

5.Connect BLACK grounding cable to negative (-) battery terminal with re- maining hex bolt and keps nut. Tighten securely

6.Close hood.

(_ (Black)Negative Cable

iNTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

• Check wiring. See electrical wiring diagram in the Repair Parts manual.

TO REPLACE FUSE

Replace with 30 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS= SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to re- connect the headlight wire connector.

Headlight Wire

Connector

Positive

(Red) Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Remove bulb holder from the hole in the backside of the grill.

3.Replace bulb in holder and install bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at

the factory and adjustment should not be necessary Check adjustment as described below before loosening cable. If adjustment is necessary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and adjustment should not be neces- sary. If adjustment is necessary, see engine manual.

TO ADJUST CARBURETOR

Your carburetor has been preset at the factory

and adjustment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, tem- perature, altitude or load. If the engine does

need adjustment, see engine manual.

27

Page 27
Image 27
Craftsman 917.289283 Engine, Replacing Battery, To Replace Fuse, To Remove Hood and Grill AS= Sembly, To Adjust Carburetor

917.289283, 917.28928 specifications

The Craftsman 917.289283 and 917.28928 are powerful lawn tractors designed for homeowners seeking exceptional performance, reliability, and innovation in their outdoor equipment. These models stand out in the market for their robust features and user-friendly technologies, making lawn care an efficient and enjoyable task.

One of the key features of the Craftsman 917.289283 and 917.28928 is their powerful engine. Equipped with a reliable engine, these tractors provide sufficient horsepower to tackle tough grass and uneven terrain. The engines deliver a strong torque, ensuring that homeowners can mow their lawns with confidence, regardless of the conditions.

Both models feature a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. The cutting deck design allows for a precise cut, ensuring that grass is trimmed evenly across various terrains. Additionally, the deck height can be easily adjusted to accommodate different grass lengths, providing versatility for lawn care.

The hydrostatic transmission featured in these tractors enhances driving experience, allowing for smooth acceleration and deceleration. Unlike traditional gear systems, the hydrostatic design enables users to control their speed with precision, making it easier to navigate around obstacles such as trees, flower beds, and garden decorations.

Another significant characteristic of the Craftsman 917.289283 and 917.28928 is their ergonomic design. The comfortable seat and steering wheel are adjustable, promoting ease of use for operators of all sizes. This level of comfort makes it easier for users to spend extended periods mowing without feeling fatigued.

Furthermore, the tractors come equipped with advanced safety features, including a safety switch under the seat that automatically shuts off the engine if the operator leaves the seat while the blades are engaged. This design element adds an extra layer of protection, particularly for households with children and pets.

In terms of maintenance, these Craftsman models are designed with convenience in mind. The easy-access engine and deck components allow users to perform routine maintenance tasks with minimal hassle. The onboard diagnostic system provides users with vital information regarding the tractor's performance, ensuring that it operates smoothly for years to come.

In conclusion, the Craftsman 917.289283 and 917.28928 empower homeowners with well-engineered lawn tractors that blend power, comfort, and safety. With their user-friendly features and dependable performance, these models are ideal choices for anyone looking to achieve a beautifully manicured lawn.