Icom IC-M32 instruction manual Optional battery case, Charging connections

8 BATTERY CHARGING

ïCharging connections

qAttach the BC-150 to a flat surface, such as a desk or cabin, etc., if desired.

wConnect the AC adapter (BC-147A/E or BM-95V) as shown below.

eInsert the battery pack with/without the transceiver into the charger.

• The charge indicator lights green.

rCharge the battery pack approx. 8 hours, depending on the remaining power condition.

DO NOT charge BP-224 more than 12 hours. Other- wise, BP-224 will be damaged. BP-224 must be charged for 8–12 hours only.

BP-224 IC-M32

Charge indicator

Lights green when

BP-224 (with/without

IC-M32) is inserted.

Supplied screws

AC adapter	BC-150
(BC-147A/E
or BM-95V)

■Optional battery case

When using a battery case attached to the transceiver, install 6 ⋅ AA(R6) size alkaline batteries as illustrated below.

qRemove the battery case from the transceiver. w Install 6 ⋅ AA(R6) size alkaline batteries.

•Be sure to observe the correct polarity.

CAUTION:

•When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together.

•Keep battery contacts clean. It’s a good idea to clean bat- tery terminals once a week.

24