Icom IC-M32 instruction manual Self check function SC, Battery voltage indicator bt

DSelf check function “SC”

The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode.

•Temperature : Outside of –25°C to +65°C; –13°F to +149°F (approx.)

•Connected battery voltage

•Water intrusion

Push

Self check OFF (default) Self check ON

When error messages as shown below are displayed, see troubleshooting for advice. (p. 29)

Temperature error Battery voltage error Water intrusion error

SET MODE 7

DBattery voltage indicator “bt”

The voltage of the connected battery pack can be turned ON (displayed for 2 sec.) or OFF (non-displayed) after power is turned ON.

	Push
Battery voltage	Battery voltage	7
indication OFF	indication ON
(default)

21