5 SCAN OPERATION

Scan types

Scanning is an efficient way to locate signals quickly over a wide frequency range. The transceiver has priority scan and normal scan.

In addition, the weather alert and auto scan function is avail- able for standby convenience. These functions can be acti- vated simultaneously, depending on the settings in SET mode. (pgs. 18, 19)

PRIORITY SCAN

CH 01

 

CH 02

WX*

CH 16

CH 03

CH 05

 

CH 04

*Previously selected weather channel when weather alert function is ON

Priority scan searches through all tag channels in sequence while monitoring Channel 16. When a signal is detected on Channel 16, scan pauses until the signal disappears; when a signal is detected on a channel other than Channel 16, scan becomes dualwatch until the signal disappears.

Set the tag channels (scanned channel) before scanning. Clear the tag channels which inconveniently stop scanning, such as digital communications.

Choose priority or normal scan in SET mode. (p. 18)

NORMAL SCAN

CH 01

CH 02

WX*

CH 03

CH 05

CH 04

*Previously selected weather channel when weather alert function is ON.

Normal scan, like priority scan, searches through all tag channels in sequence. However, unlike priority scan, Chan- nel 16 is not checked unless Channel 16 is set as a tag channel.

14

Page 20
Image 20
Icom IC-M32 instruction manual Scan Operation, Scan types, Priority Scan, Normal Scan