ENGLISH ESPAÑOL
64

Troubleshooting Resolución de problemas

Troubleshooting
Resolución de problemas
Before contacting a service center, perform the following simple
checks. They might save you the time and expense of an
unnecessary call.
Self Diagnosis Display
Display
Blinking
Inform that... Action
slow the battery pack is Change it to a
almost discharged chargedone.
fast the battery pack is Change it to a
fully discharged. charged battery.
TAPE slow the tape has almost Prepare a new one.
END! reached its end.
TAPE no the tape reached Change to a new one.
END! its end
TAPE! slow there is no tape in Insert a tape.
the camcorder.
PROTECTION!
slow the tape is protected If you want to record,
from recording. release the protection.
D.EMG slow the camcorder has 1. Eject the tape.
C.EMG some mechanical 2. Set to OFF
R.EMG fault. 3. Detach the battery.
L.EMG 4. Reattach the battery.
*Please contact your
local service center if
the problem continues.
slow
moisture condensation
see page 67.
has formed in the
camcorder.
Antes de ponerse en contacto con un centro de servicio,
efectúe las sencillas verificaciones siguientes. Le pueden
ahorrar el tiempo y el dinero de una visita innecesaria.
Pantalla de autodiagnóstico
Pantalla
Parpadeo
Informa que... Acción
lento la batería está casi Cámbiela por una
descargada. cargada.
rápido la batería está com-
Cámbiela por una batería
pletamente descargada. cargada.
TAPE lento la cinta ya casi ha Prepare una cinta
END! llegado al final. nueva.
TAPE no la cinta ha llegado
Cámbiela por una nueva.
END! al final
TAPE! lento no hay cinta en la Introduzca una cinta.
videocámara.
PROTECTION!
lento la cinta está protegida
Si usted desea grabar tendrá
de ser regrabada.
que quitar la protección.
D.EMG lento la videocámara tiene 1. Extraiga la cinta.
C.EMG alguna avería 2. Ponga la videocámara
R.EMG mecánica. en OFF.
L.EMG 3. Retire la batería.
4.
Vuelva a colocar la batería
*
Si el problema continúa,
póngase en contacto con
el servicio local.
lento
Se ha formado con-
Consulte la pág 67.
densación de humedad
dentro de la videocámara.
00607D SCL810-USA+ESP(46-70) 3/19/03 3:42 PM Page 64