PANEL DESCRIPTION 3

uCHANNEL UP/DOWN KEYS [Y]/[Z]•[TAG]

Selects an operating channel. (pgs. 8, 9)

Selects the SET mode condition of the item. (p. 17)

Checks tag channels or changes scanning direction dur- ing scan. (p. 15)

Sets or clears the displayed channel as a tag (scanned) channel when pushed both keys for 1 sec. (p. 15)

While turning power ON, clears all tag channels in the se- lected channel group when both keys are pushed. (p. 15)

i CHANNEL/WEATHER CHANNEL KEY [CH/WX•U/I/C]

Toggles the regular channels and weather channel when pushed. (p. 9)

Selects one of 3 (or 2*) regular channel groups in se- quence when pushed for 1 sec. (p. 9)

- U.S.A., International and Canadian* channels are available. *Canadian channels are available for the USA version only.

Push to return to the channel selection before selecting the channel 16 or the call channel with [16•9].

o CHANNEL 16 KEY [16•9]

 

• Selects Channel 16 when pushed. (p. 8)

3

Selects the call channel when pushed for 1 sec. (p. 8)

- Channel 9 is factory default.

Enters call channel programming condition when the call channel is selected and this key is pushed for 3 sec. (p. 12)

Exits set mode when pushed during set mode operation. (p. 17)

!0PTT SWITCH [PTT]

Push and hold to transmit; release to receive.

5

Page 11
Image 11
Icom IC-M32 instruction manual Panel Description, 0PTT Switch PTT