TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. Iftires are over or under

inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT

1.With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

2.With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

FRONT=TO=BACK ADJUSTM ENT

IMPORTANT: Deck must be level side- to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the ,i_ower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

®

Turn nut

rigl

..... Turn nut left

to raise

mower

.....to bower mower

3.Test your adjustment by mowing some

uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT

1.With alltires properly inflated, parktractor on level ground or driveway.

_IL CAUTION" Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

2.Raise mower to its highest position.

3.At both sides of mower, position blade at side and measure the distance (A) from

bottom edge of blade to the ground. The distance should be the same on both sides.

4.If adjustment is necessary, see step 2 in Visual Adjustment instructions above.

5.Recheck measurements, adjust if neces- sary until both sides are equal.

With a 3/4" or adjustable wrench, turn

front link adjustment nut (B) clockwise (tighten) to raise the front of mower, or,

counterclockwise (loosen) to lower the front mower.

Tighten adjust nut

Loosen

adjust

nut B to lower

B to raise mower

 

mower

 

°j °°° "

Loosen jam nut A first

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if neces- sary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against ad- justment nut.

24

Page 23 Page 25
Page 24
Image 24
Craftsman 917.289283 owner manual FRONT=TO=BACK Adjustm ENT, To Level Mower, Visual SIDE-TO-SIDE Adjustment
Page 23 Page 25

917.289283, 917.28928 specifications

The Craftsman 917.289283 and 917.28928 are powerful lawn tractors designed for homeowners seeking exceptional performance, reliability, and innovation in their outdoor equipment. These models stand out in the market for their robust features and user-friendly technologies, making lawn care an efficient and enjoyable task.

One of the key features of the Craftsman 917.289283 and 917.28928 is their powerful engine. Equipped with a reliable engine, these tractors provide sufficient horsepower to tackle tough grass and uneven terrain. The engines deliver a strong torque, ensuring that homeowners can mow their lawns with confidence, regardless of the conditions.

Both models feature a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. The cutting deck design allows for a precise cut, ensuring that grass is trimmed evenly across various terrains. Additionally, the deck height can be easily adjusted to accommodate different grass lengths, providing versatility for lawn care.

The hydrostatic transmission featured in these tractors enhances driving experience, allowing for smooth acceleration and deceleration. Unlike traditional gear systems, the hydrostatic design enables users to control their speed with precision, making it easier to navigate around obstacles such as trees, flower beds, and garden decorations.

Another significant characteristic of the Craftsman 917.289283 and 917.28928 is their ergonomic design. The comfortable seat and steering wheel are adjustable, promoting ease of use for operators of all sizes. This level of comfort makes it easier for users to spend extended periods mowing without feeling fatigued.

Furthermore, the tractors come equipped with advanced safety features, including a safety switch under the seat that automatically shuts off the engine if the operator leaves the seat while the blades are engaged. This design element adds an extra layer of protection, particularly for households with children and pets.

In terms of maintenance, these Craftsman models are designed with convenience in mind. The easy-access engine and deck components allow users to perform routine maintenance tasks with minimal hassle. The onboard diagnostic system provides users with vital information regarding the tractor's performance, ensuring that it operates smoothly for years to come.

In conclusion, the Craftsman 917.289283 and 917.28928 empower homeowners with well-engineered lawn tractors that blend power, comfort, and safety. With their user-friendly features and dependable performance, these models are ideal choices for anyone looking to achieve a beautifully manicured lawn.
Top Page Image Contents