Maintenance, Service and Adjustments | Weed Eater 530164835 specs

RECOMMENDED CUTTING POSITION

	2 o’clock
Cut using the 2
o’clock to 4 o’clock	4 o’clock
position of the	4 o’clock
blade

WARNING: The operator or others must not try to clear away cut material with the engine running or the blade turning to avoid serious injury. Stop engine and blade before removing materials wrapped around blade or shaft.

MAINTENANCE

WARNING: Always stop unit and dis- connect spark plug wire before performing maintenance.

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SBlade Shield -- Discontinue use of brushcut- ter attachment if shield is damaged.

CHECK FOR LOOSE FASTENERS AND PARTS

SBlade nut S Fasteners

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

S Wipe off unit with a clean dry cloth.

BLADE MAINTENANCE

WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug before performing work on the blade.

WARNING: Always replace a blade that is bent, warped, cracked, broken, or dam- aged in any other way. Never attempt to straighten and reuse a damaged blade. Use only specified replacement blade. Wear pro- tective gloves when handling or performing maintenance on the blade to help avoid injury. S Check blade for flatness periodically. Lay

the blade on a flat surface to inspect for flat- ness. Throw away a blade that is not flat.

SERVICE AND ADJUSTMENTS

BLADE REPLACEMENT

WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving.

1.To remove the blade, align hole in the dust cup with the hole in the side of the gear- box by rotating the blade.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turn- ing while loosening the blade nut.

Screwdriver

3.While holding the screwdriver in position, remove blade nut by turning clockwise as you are facing the nut.

4.Remove both washers and the blade from the blade shaft. Leave the dust cup on the gearbox.

5.Install new blade and retaining washer onto the threaded shaft extending from the gear- box (blade must be between the dust cup and the retaining washer). Make sure the raised part of the retaining washer is facing the gearbox, and the raised area fits into the hole in the center of the blade.

Gearbox

Shield

Dust Cup	Threaded Shaft
	Threaded Shaft
Retaining	Blade
Retaining
Washer
Cupped
Washer	Nut
	Nut

530164835 specifications

The Weed Eater 530164835 is a versatile and reliable tool designed to tackle the challenges of maintaining a pristine lawn and garden. This grass trimmer is known for its ease of use, lightweight design, and powerful performance, making it an ideal choice for both homeowners and professional landscapers.

One of the standout features of the Weed Eater 530164835 is its powerful engine, which delivers efficient cutting power to handle a variety of vegetation. The engine is designed to provide consistent performance, allowing users to trim grass, weeds, and overgrown areas with ease. This makes it suitable for a range of applications, from shaping edges around flower beds to clearing thick underbrush.

A key technology employed in the design of the Weed Eater 530164835 is its automatic line feed system. This innovative feature ensures that the trimmer's cutting line is dispensed seamlessly as needed, allowing for uninterrupted operation. This technology eliminates the need for manual adjustments, saving time and enhancing user convenience.

The lightweight construction of the Weed Eater 530164835 further enhances its usability. Weighing in at a manageable level, this trimmer allows users to maneuver it with ease, reducing fatigue even during extended use. The ergonomic handle design also contributes to comfort, providing a secure grip that helps maintain control while trimming.

Another notable characteristic of the Weed Eater 530164835 is its adjustable cutting width. Users can customize the trimmer's cutting path to suit their specific needs, ensuring optimal efficiency for different tasks. This flexibility is particularly beneficial when transitioning from trimming smaller areas to tackling larger, more open spaces.

Durability is also a hallmark of the Weed Eater 530164835. Constructed with high-quality materials, this trimmer is built to withstand the rigors of regular use. Its design incorporates features that protect against wear and tear, ensuring longevity and reliable performance over time.

In conclusion, the Weed Eater 530164835 is a well-rounded grass trimmer that combines power, technology, and user-friendly features. Whether maintaining a small yard or managing larger landscaping projects, this tool offers the performance and reliability needed to achieve a well-groomed outdoor space. With its automatic line feed, adjustable cutting width, and comfortable design, it stands out as a quality choice for anyone looking to keep their garden in top shape.