Weed Eater 530164835 instruction manual Limited Warranty, Seasonal Storage

6.Place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

7.Install blade nut by threading onto the

shaft counterclockwise as you are facing the nut.

NOTE: Make sure all parts are in place as illus- trated, and the blade is sandwiched between the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

8.Tighten blade nut firmly with a wrench while holding screwdriver in position.

9.Remove the screwdriver.

10.Turn blade by hand. If the blade binds against the shield, or appears to be un- even, the blade is not centered, and you must reinstall.

STORAGE

WARNING: Perform the following steps after each use:

SAllow attachment and gearbox to cool be-

fore storing or transporting.

SStore attachment with blade shield in place. Position attachment so that any sharp ob-

ject cannot accidentally cause injury.

SStore the attachment in a dry, well ventilated area out of the reach of children.

SEASONAL STORAGE

Prepare attachment for storage at end of sea- son or if it will not be used for 30 days or more. If your brushcutter attachment is to be stored for a period of time:

SClean the entire attachment.

SInspect the blade shield area and clean any dirt, grass, leaves, or debris that has col- lected. Inspect the blade and blade shield; replace a blade that is bent, warped, cracked, broken or damaged in any other way.

SLightly oil external metal surfaces.

SApply a coating of oil to the entire surface of the blade; wrap it in heavy paper or cloth.

SCheck entire attachment for loose screws or nuts. Replace any damaged, worn or

broken parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

LIMITED WARRANTY

ELECTROLUX HOME PRODUCTS, INC., warrants to the original purchaser that each new Weed Eater→ brand gasoline tool or at- tachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline product or attachment as follows from the original date of purchase.

2 YEARS -- Parts and Labor, when used for household purposes.

90 DAYS -- Parts and Labor, when used for commercial, professional, or income produc- ing purposes.

30 DAYS -- Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifi- cally recommended by ELECTROLUX HOME PRODUCTS, INC., for this tool. Addi- tionally, this warranty does not cover tune- ups, spark plugs, filters, cutting line, or rotating head parts that will wear and require replace- ment with reasonable use during the warranty period. This warranty does not cover predeliv- ery setup or normal adjustments explained in the instruction manual.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

The policy of ELECTROLUX HOME PROD-

UCTS, INC., is to continuously improve its products. Therefore, ELECTROLUX HOME PRODUCTS, INC., reserves the right to change, modify, or discontinue models, de- signs, specifications, and accessories of all products at any time without notice or obliga- tion to any purchaser.

9