Weed Eater 545117535 Stop the motor immediately if you are ap- proached, UNIT/MAINTENANCE Safety

Page 3

still does not fit, contact a qualified electri- cian to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way.

STo reduce the risk of electrical shock, use extension cords specifically marked as suitable for outdoor appliances. The elec- trical rating of the cord must not be less than the rating of the unit. The cord must be marked with the suffix “W-A” (in Cana- da, “W”). Make sure your extension cord is in good condition. Inspect extension cord before use and replace if damaged. An undersized extension cord will cause a drop in line voltage resulting in loss of power and overheating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. (NOTE: The correct size to be used de- pending on the cord length is shown in this manual. See SELECT AN EXTENSION CORD in the ASSEMBLY section).

SDo not use multiple cords.

SKeep the extension cord clear of operator and obstacles at all times.

STie cord to cord retainer and connect to recessed plug as shown in this manual to prevent damage to unit and/or extension cord and to reduce the possibility of the

extension cord disconnecting from the unit during operation.

SDo not attempt to repair unit. Inspect the insulation and connectors on the unit and extension cord before each use. If there is any damage, do not use until damage is repaired by your authorized service dealer.

SDo not use the unit if the switch does not turn the unit on and off properly. Have the unit repaired by your authorized service dealer.

S Avoid accidental starting. Be sure the switch is in the OFF position and keep your hand and fingers away from the switch while connecting the unit to the power source or when carrying a unit con- nected to the power source.

S Avoid any body contact with any grounded conductor, such as metal fences, or pipes, to avoid the possibility of electric shock.

S Ground Fault Circuit Interrupter (GFCI) protection should be provided on the cir- cuit or outlet to be used for this unit. Re- ceptacles are available having built-in GFCI protection and may be used for this measure of safety.

SStop the motor immediately if you are ap- proached.

DOUBLE INSULATION

CONSTRUCTION

This unit is double insulated to help pro- tect against electric shock. Double insula- tion construction consists of two separate “layers” of electrical insulation instead of grounding. Tools and appliances built with a double insulation system are not in- tended to be grounded. No grounding means is provided on this unit, nor should a means of grounding be added to this unit. As a result, the extension cord used with your unit can be plugged into any standard 120 volt electrical outlet. Safety precautions must be observed when op- erating any electrical tool. The double in- sulation system only provides added pro- tection against injury resulting from an internal electrical insulation failure.

WARNING:

All electrical repairs to this unit, including housing, switch, motor, etc., must be diag- nosed and repaired by qualified service personnel. Replacement parts for a double insulated appliance must be iden- tical to the parts they replace. A double in- sulated appliance is marked with the words “double insulation” or “double insu- lated”. The symbol (square within a square) may also be marked on the ap- pliance. Failure to have the unit repaired by an authorized service dealer can cause the double insulation construction to become ineffective and result in serious injury.

UNIT/MAINTENANCE SAFETY

SDo not set the unit on any surface except a clean, hard area while the unit is run- ning. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air intake and thrown out through the dis- charge opening, damaging the unit, prop- erty, or causing serious injury to bystand- ers or operator.

S Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc. Use extra care when cleaning on stairways. Keep firm footing and balance at all times. Keep hands out of tubes.

SInspect the entire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is in proper work- ing order.

S This unit is double insulated. See the

DOUBLE INSULATION CONSTRUCTION

section. Have all internal service per- formed by qualified service repair per- sonnel to avoid creating a hazard or voiding your warranty.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Français English EspañolSafety Rules Operator SafetyElectrical Safety UNIT/MAINTENANCE Safety Stop the motor immediately if you are ap- proachedDouble Insulation Construction Standards Blower SafetyVacuum Safety Use only in daylight or in good artificial lightStandard screwdriver is required for as- sembly AssemblyBlower Assembly Vacuum AssemblyStop unit and unplug the extension cord Collection BAG AssemblyAdjusting the Shoulder Strap on the Collection BAG HOW to Convert Unit from Vacuum USE to Blower USEKnow Your Electric Blower Extension cord used to reach the power source must beON/OFF Switch Inlet Cover Latch ON/OFF Switch is used to activateInlet Restrictor Using Your Unit AS a VacuumUsing Your Unit AS a Blower Blower Tube Tube Release ButtonMaintenance ServiceStorage Clean air vents and air inlet of debris Troubleshooting Table Symptom Cause RemedyWeed Eater

545117535, EBV 200W specifications

The Weed Eater EBV 200W, model number 545117535, is a powerful and efficient leaf blower designed for residential and occasional commercial use. This compact and lightweight machine is perfect for homeowners looking to maintain their lawns and gardens effortlessly.

One of the standout features of the EBV 200W is its impressive 200-watt motor, which delivers a robust performance. The blower generates an air speed of up to 155 mph, making it capable of tackling even the toughest leaves and debris with ease. This means users can quickly clear their yards or pathways, saving time and reducing the effort usually required for such tasks.

The design of the EBV 200W emphasizes user comfort and ease of use. Weighing in at around 4.5 pounds, it is lightweight, allowing users to operate it for extended periods without fatigue. The ergonomic handle is designed to provide a comfortable grip, and the unit is equipped with a variable speed trigger that enables users to control the airflow according to their needs. This feature not only enhances performance but also improves efficiency, ensuring that no energy is wasted.

In terms of technology, the EBV 200W incorporates a reliable electric motor that eliminates the hassle of mixing fuel or dealing with exhaust emissions. This eco-friendly feature makes it an excellent choice for those conscious of their environmental impact. The electric design also means that it operates quietly, ensuring that users can work without disturbing the peace of their neighbors.

Another notable characteristic is the durability of the materials used in the construction of the EBV 200W. Designed to withstand regular use, it is built to last, providing users with a dependable tool for their outdoor cleaning needs.

Additionally, the Weed Eater EBV 200W boasts a simple maintenance routine, allowing users to keep the machine in top working condition without requiring specialized knowledge or tools.

In summary, the Weed Eater EBV 200W, 545117535, is an excellent choice for anyone looking for a reliable, efficient, and easy-to-use leaf blower. With its powerful motor, lightweight design, ergonomic features, and environmentally friendly technology, it stands out as a top contender in the outdoor maintenance market. Whether tackling autumn leaves or debris, it provides homeowners with the performance they need to keep their yards looking pristine.
Top Page Image Contents