Weed Eater EBV 200W Blower Safety, Use only in daylight or in good artificial light, Standards

Page 4

SHave all maintenance other than the rec- ommended procedures described in the instruction manual performed by your au- thorized service dealer.

SAlways see your authorized service deal- er to replace a damaged impeller. Parts that are chipped, cracked, broken, or damaged in any other way can fly apart and cause serious injury. Replace dam- aged parts before using the unit.

S Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit.

SNever douse the unit with water or other liquids or squirt with a water hose. Clean the unit using a damp cloth. Wipe off with a clean dry cloth. See MAINTENANCE.

SCheck air intake openings and tubes fre- quently, always with the unit stopped and power source disconnected. Keep vents and tubes free of debris which can accu- mulate and restrict proper air flow.

S Do not burn, incinerate, or expose this unit to extreme heat.

SStore the unit unplugged in a high, cool, dry, indoor area out of the reach of chil- dren.

SUse only recommended attachments and replacement parts to avoid creating a hazard and/or voiding warranty.

S Maintain the unit according to recom- mended procedures.

SUse only for jobs explained in the OPERA- TION section of this manual.

BLOWER SAFETY

S Use only in daylight or in good artificial light.

S Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can rico- chet, be thrown, or otherwise cause injury or damage during operation.

S Never run the unit without the proper equipment attached. When used as a blower, always install a blower tube. Use only recommended attachments.

STo avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbe- cue pits, ashtrays, etc.

S Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.

SNever use for spreading chemicals, fertil- izers, or any other substances which may contain toxic materials.

VACUUM SAFETY

SStop the motor and disconnect the power source before opening the air inlet door or attempting to insert or remove the vacu- um tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades.

SHard objects can be thrown through the

collection bag or the housing and become dangerous missiles which can cause seri- ous injury to the operator or others.

SWhen using the vacuum attachment, the unit is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not vacuum stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid

the possibility of electrical shock, do not attempt to vacuum water or other liquids.

S Never run the unit without the proper equipment attached. When used as a vacuum, always install vacuum tubes and collection bag assembly. Make sure the collection bag assembly is completely zipped when unit is running to avoid flying debris. Use only recommended attach- ments.

SAvoid situations which could set the col- lection bag on fire. Do not vacuum dis- carded matches, cigars, cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc. To avoid spreading fire, do not use blower near leaf or brush fires, fire- places, barbecue pits, ashtrays, etc.

S Always use the collection bag shoulder strap when vacuuming to avoid loss of control.

S Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source disconnected. Keep vents and tubes free of debris which can accumulate and re- strict proper air flow. Do not use with any opening blocked, Keep free of dust, lint, hair and anything that may reduce air flow.

STANDARDS

This product is listed by Underwriters Lab- oratories, Inc., in accordance with UL Standard 1017.

If situations occur which are not covered in this manual, use care and good judg- ment. If you need assistance, contact your authorized service dealer or call 1--800--554--6723. Failure to follow all Safety Rules and Precautions can result in serious injury.

SAVE THESE INSTRUCTIONS

4

Image 4
Contents English Español FrançaisOperator Safety Safety RulesElectrical Safety Stop the motor immediately if you are ap- proached UNIT/MAINTENANCE SafetyDouble Insulation Construction Blower Safety Vacuum SafetyUse only in daylight or in good artificial light StandardsAssembly Blower AssemblyVacuum Assembly Standard screwdriver is required for as- semblyCollection BAG Assembly Adjusting the Shoulder Strap on the Collection BAGHOW to Convert Unit from Vacuum USE to Blower USE Stop unit and unplug the extension cordExtension cord used to reach the power source must be ON/OFF Switch Inlet Cover LatchON/OFF Switch is used to activate Know Your Electric BlowerUsing Your Unit AS a Vacuum Using Your Unit AS a BlowerBlower Tube Tube Release Button Inlet RestrictorService MaintenanceStorage Troubleshooting Table Symptom Cause Remedy Clean air vents and air inlet of debrisWeed Eater

545117535, EBV 200W specifications

The Weed Eater EBV 200W, model number 545117535, is a powerful and efficient leaf blower designed for residential and occasional commercial use. This compact and lightweight machine is perfect for homeowners looking to maintain their lawns and gardens effortlessly.

One of the standout features of the EBV 200W is its impressive 200-watt motor, which delivers a robust performance. The blower generates an air speed of up to 155 mph, making it capable of tackling even the toughest leaves and debris with ease. This means users can quickly clear their yards or pathways, saving time and reducing the effort usually required for such tasks.

The design of the EBV 200W emphasizes user comfort and ease of use. Weighing in at around 4.5 pounds, it is lightweight, allowing users to operate it for extended periods without fatigue. The ergonomic handle is designed to provide a comfortable grip, and the unit is equipped with a variable speed trigger that enables users to control the airflow according to their needs. This feature not only enhances performance but also improves efficiency, ensuring that no energy is wasted.

In terms of technology, the EBV 200W incorporates a reliable electric motor that eliminates the hassle of mixing fuel or dealing with exhaust emissions. This eco-friendly feature makes it an excellent choice for those conscious of their environmental impact. The electric design also means that it operates quietly, ensuring that users can work without disturbing the peace of their neighbors.

Another notable characteristic is the durability of the materials used in the construction of the EBV 200W. Designed to withstand regular use, it is built to last, providing users with a dependable tool for their outdoor cleaning needs.

Additionally, the Weed Eater EBV 200W boasts a simple maintenance routine, allowing users to keep the machine in top working condition without requiring specialized knowledge or tools.

In summary, the Weed Eater EBV 200W, 545117535, is an excellent choice for anyone looking for a reliable, efficient, and easy-to-use leaf blower. With its powerful motor, lightweight design, ergonomic features, and environmentally friendly technology, it stands out as a top contender in the outdoor maintenance market. Whether tackling autumn leaves or debris, it provides homeowners with the performance they need to keep their yards looking pristine.