Storage

REPLACE FUEL FILTER

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Fuel Line

Fuel Filter

CHECK MUFFLER MOUNTING SCREWS

Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage.

Mounting Screw

Muffler Cover	Holes

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance.

VIEW OF MUFFLER

Spark arresting screen

Exhaust

Diverter

Screws

Replace the spark arresting screen every 50 hours of operation or if any damage or breaks in the screen are noted.

NOTE: Do not attempt to clean the spark ar- resting screen.

1.Loosen and remove the 2 screws from the muffler cover. Remove the muffler cover.

2.Loosen and remove both screws from the exhaust diverter.

3.Remove the exhaust diverter and spark arresting screen.

4 Install new spark arresting screen.

5.Reinstall exhaust diverter and both screws. Tighten screws securely.

6.Reinstall muffler cover and 2 screws. Tighten securely.

NOTE: If any part of the muffler is cracked, broken or damaged, we recommend that the muffler be replaced.

CARBURETOR ADJUSTMENT

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your engine will not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy stor-

age.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

-- 7 --

530165291-01, B1750 LE specifications

The Weed Eater B1750 LE, model number 530165291-01, presents a powerful solution for tackling various outdoor weed control tasks. Designed for both professionals and avid gardeners, this string trimmer boasts an impressive array of features, ensuring efficient performance for maintaining lawns, gardens, and outdoor spaces.

At its core, the B1750 LE is powered by a reliable 17 cc, 2-cycle engine, delivering the capability to effectively trim through tough weeds and grass. This lightweight engine offers a perfect balance of power and portability, making it easy to maneuver around shrubs, flower beds, and tight corners in your yard. The innovative design of the engine ensures reduced emissions and improved fuel efficiency, thereby contributing to environmental sustainability.

One of the standout features of the B1750 LE is its Easy Start technology, which simplifies the starting process. With just a few simple pulls, users can ignite the engine with minimal effort, reducing frustrations often associated with traditional starting mechanisms. This technology is particularly beneficial for those who may struggle with more demanding equipment.

Equipped with a generous 16-inch cutting swath, the B1750 LE allows users to cover more ground in less time, cutting down on overall trimming time. The Tap 'n Go line advancement feature allows for quick and easy line feed, ensuring that the cutting line is always ready for use without the need for complicated adjustments. This functional design minimizes downtime when tackling large areas.

Durability is also a hallmark of the Weed Eater B1750 LE. The trimmer features a robust construction, with a reinforced cutting head designed to withstand heavy usage. Moreover, it is equipped with ergonomically designed handles, providing comfort during extended use and reducing hand fatigue. The shoulder strap included with the trimmer further enhances user comfort by distributing weight evenly across the body.

In terms of versatility, this string trimmer is ideal for a variety of tasks, from edging along sidewalks and driveways to clearing thick underbrush and overgrown grass. The optional attachments available for the B1750 ensure that users can expand its functionality to meet their specific gardening needs.

In summary, the Weed Eater B1750 LE, 530165291-01, is an effective and efficient string trimmer that combines power, ease of use, and durability. Its advanced features and technologies make it an excellent choice for anyone looking to maintain their yard efficiently and effectively. Whether you're a seasoned professional or a weekend warrior, the B1750 LE is designed to make lawn care tasks easier and more enjoyable.