Vacuum Tube Assembly, Operating Tips | Weed Eater SB180BV guide

VACUUM TUBE ASSEMBLY

DRemove the blower tube from the engine. D Insert a screwdriver into the latch area on

the vacuum inlet cover.

D Gently tilt the tip of the screwdriver forward toward blower outlet while pulling up on the vacuum inlet cover with your other hand.

D Hold the vacuum inlet cover open until up- per vacuum tube is installed.

Latch Area

Blower

Outlet

Latch Area

Vacuum

Inlet

Cover

D Assemble upper vacuum to unit; turn clockwise to tighten.

DAlign slanted end of lower vacuum tube as shown. Push lower vacuum tube into up-

per vacuum tube.

DInsert the elbow tube into the blower outlet.

Make sure elbow tube is curved to the left.

DTurn tube counterclockwise to tighten.

Elbow Tube

Curved To

The Left

Slanted

Blower

End

Outlet

Vacuum Inlet Cover

Vacuum Inlet

D When converting back to the blower fea- ture, make sure that the latch on the vacu- um inlet cover is securely fastened.

SHOULDER STRAP ADJUSTMENT (for vacuum bag)

DHold the unit as shown below.

D Pass the shoulder strap over your head and onto your left shoulder.

DSnap the hook onto the retainer on the top handle.

D Extend your right arm toward the rear of the vacuum bag.

D Adjust shoulder strap until the vacuum bag/shoulder strap seam lies between your thumb and index finger.

DMake sure air flows freely from the elbow tube into bag. If bag is kinked, the unit will not operate properly.

YOU MUST make sure the tubes are secure before using the unit.

Eye Protection

BLOWERVACUUM

OPERATING TIPS

DTo reduce the risk of hearing loss associat- ed with sound level(s), hearing protection is required.

DTo reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments.

Do not operate without guards in place. D Operate power equipment only at reason-

able hours--not early in the morning or late at night when people might be disturbed. Com- ply with times listed in local ordinances. Usu- al recommendations are 9:00 a.m. to 5:00 p.m., Monday through Saturday.

DTo reduce noise levels, limit the number of

pieces of equipment used at any one time. D To reduce noise levels, operate power blowers at the lowest possible throttle

speed to do the job.

D Use rakes and brooms to loosen debris before blowing.

D In dusty conditions, slightly dampen sur- faces or use a mister attachment when water is available.

D Conserve water by using power blowers instead of hoses for many lawn and gar-

-- 4 --

530087854, SB180BV specifications

The Weed Eater SB180BV is a reliable and efficient string trimmer designed for both residential and light commercial use. Engineered to tackle various trimming tasks with ease, this model is a favorite among homeowners and gardening enthusiasts. One of the standout features of the SB180BV is its lightweight design, making it easy to maneuver and reducing fatigue during extended use. Weighing around 11 pounds, it offers a comfortable grip that allows users to navigate around flower beds, fences, and other obstacles effortlessly.

Powering the SB180BV is a robust 18cc 2-stroke engine that provides the necessary strength to tackle tough weeds and thick grass. This engine technology ensures efficient fuel consumption while maintaining high performance, making it both cost-effective and eco-friendly. The trimmer features an easy-start system that simplifies starting with minimal effort, allowing users to get straight to work without the frustration of pull-string engines.

One of the key technologies integrated into the Weed Eater SB180BV is its bump feed line advancement system. This feature allows users to quickly release more line simply by tapping the trimmer head against the ground. This ensures continuous operation without the need to stop and manually adjust the line, enhancing overall productivity. The dual-line design provides increased cutting efficiency and allows for a clean finish on edges and borders.

The adjustable shaft length is another noteworthy characteristic, providing users with the flexibility to customize the trimmer to their height and comfort level. This feature not only enhances comfort but also promotes better posture during operation. The SB180BV is also equipped with an ergonomic handle which reduces vibrations, contributing to a smoother trimming experience.

Safety is a priority with the Weed Eater SB180BV, and it features a protective guard to shield the user from debris. The design also ensures that the trimmer is well-balanced, further promoting safety during operation. With its combination of lightweight construction, powerful engine, and user-friendly features, the Weed Eater SB180BV is a valuable investment for anyone looking to maintain a neat and tidy lawn effortlessly. This model embodies reliability and performance, making it an essential tool for yard maintenance.