Weed Eater 530087854, SB180BV manual Maintain Your Unit Properly, Preparation Blower Tube Assembly

Page 3

MAINTAIN YOUR UNIT PROPERLY

DHave all maintenance other than the rec- ommended procedures described in the Operator’s Manual performed by your

Service Dealer.

D Disconnect spark plug before performing maintenance except for carburetor adjust- ments.

D Use only recommended WEED EATER replacement parts; use of any other parts may void your warranty and cause dam- age to your unit.

DEmpty the fuel tank before storing the unit. Use up fuel left in carburetor by starting the

engine and letting it run until it stops.

DDo not use any accessory or attachment

other than those recommended by the manufacturer for use with your unit.

DDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame from water heaters, electric

motors or switches, furnaces, etc.

DStore in a dry area out of reach of children.

SPECIAL NOTICE: For users on U.S.

Forest Land and in some states, including California(Public Resources Codes 4442 and 4443), Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington: Certain in- ternal combustion engines operated on for- est, brush, and/or grass covered land in the above areas are required to be equipped with a spark arrestor, maintained in effective working order, or the engine must be con- structed, equipped, and maintained for the prevention of fire. Check with your state or local authorities for regulations pertaining to these requirements. Failure to follow these requirements is a violation of the law. This unit is not factory equipped with a spark ar- restor; however, a spark arrestor is available as an optional part. If a spark arrestor is re- quired in your area, contact your Authorized Service Dealer for the correct kit. The spark arrestor, blower tubes, and nozzles must be assembled to the unit to be in full compliance with the regulations.

SPECIAL NOTICE: Exposure to vibra- tions through prolonged use of gasoline powered hand tools could cause blood ves- sel or nerve damage in the fingers, hands, and joints of people prone to circulation dis- orders or abnormal swelling. Prolonged use in cold weather has been linked to blood ves- sel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or tex- ture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An antivibration sys- tem does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

PREPARATION

WARNING: Stop the engine and be sure the impeller blades have stopped turn- ing before opening the vacuum inlet door or attempting to insert or remove the vacuum tubes. The rotating blades can cause seri- ous injury.

WARNING: If you receive your unit assembled, check each step to insure your unit is properly assembled. Follow all safety information in the manual and on the unit.

BLOWER TUBE ASSEMBLY

D Assemble the blower tube and nozzle to the unit (turn clockwise to tighten).

Blower

Blower Outlet

Tube

Nozzle

SHOULDER STRAP ASSEMBLY (for blower use only)

D Pass the shoulder strap over your head and onto your left shoulder.

DSnap the hook onto the retainer on the top handle.

Retainer

VACUUM BAG ASSEMBLY

DOpen the zipper on the vacuum bag and in-

sert the elbow tube.

D Push the end of the elbow tube with the grooves through the small bag tube open- ing. Make sure the bag tube opening is flush against large raised rib on the tube.

DClose the zipper on the bag. Make sure the zipper is closed completely and the zipper seam is tucked toward inside of the bag.

Raised Rib

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bag Tube

Zipper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Opening

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Opening

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-- 3 --

Image 3
Contents SB180BV Operate Your Unit Safely Know Your UnitPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableMaintain Your Unit Properly Preparation Blower Tube AssemblyShoulder Strap Assembly for blower use only Vacuum BAG AssemblyVacuum Tube Assembly Shoulder Strap Adjustment for vacuum bagOperating Tips Starting a Warm Engine To Stop the EngineBefore Starting the Engine Starting PositionIgnition Timing Carburetor AdjustmentsTroubleshooting Table Cause Remedy Spark PlugQuential Damages POULAN/WEED Owner if the part is under warranty. Emis

530087854, SB180BV specifications

The Weed Eater SB180BV is a reliable and efficient string trimmer designed for both residential and light commercial use. Engineered to tackle various trimming tasks with ease, this model is a favorite among homeowners and gardening enthusiasts. One of the standout features of the SB180BV is its lightweight design, making it easy to maneuver and reducing fatigue during extended use. Weighing around 11 pounds, it offers a comfortable grip that allows users to navigate around flower beds, fences, and other obstacles effortlessly.

Powering the SB180BV is a robust 18cc 2-stroke engine that provides the necessary strength to tackle tough weeds and thick grass. This engine technology ensures efficient fuel consumption while maintaining high performance, making it both cost-effective and eco-friendly. The trimmer features an easy-start system that simplifies starting with minimal effort, allowing users to get straight to work without the frustration of pull-string engines.

One of the key technologies integrated into the Weed Eater SB180BV is its bump feed line advancement system. This feature allows users to quickly release more line simply by tapping the trimmer head against the ground. This ensures continuous operation without the need to stop and manually adjust the line, enhancing overall productivity. The dual-line design provides increased cutting efficiency and allows for a clean finish on edges and borders.

The adjustable shaft length is another noteworthy characteristic, providing users with the flexibility to customize the trimmer to their height and comfort level. This feature not only enhances comfort but also promotes better posture during operation. The SB180BV is also equipped with an ergonomic handle which reduces vibrations, contributing to a smoother trimming experience.

Safety is a priority with the Weed Eater SB180BV, and it features a protective guard to shield the user from debris. The design also ensures that the trimmer is well-balanced, further promoting safety during operation. With its combination of lightweight construction, powerful engine, and user-friendly features, the Weed Eater SB180BV is a valuable investment for anyone looking to maintain a neat and tidy lawn effortlessly. This model embodies reliability and performance, making it an essential tool for yard maintenance.