![](/images/new-backgrounds/1303302/30330215x1.webp)
ASSEMBLY
WARNING
13
Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
| 1 |
| 13 |
| TEMP |
100 | 9 2 7 6 8 |
| 7 |
110 |
|
Motor
Harness
Connector
Wire
1 | FRONT VIEW |
|
•Position the dash on the vehicle.
•Make sure the motor harness connector wire is through the groove in the dash.
•Insert five #10 x ¾" (1,9 cm) screws into the dash tabs and tighten.
2DASH VIEW
•Place the labels exactly as shown in the illus- tration and avoid repositioning a label once it has been applied.
Key Assembly
Dash
3
•Insert and “snap” the key assembly into the opening in the dash, as shown.
8 |