ASSEMBLY
Hole
Steering
Column
4BOTTOM VIEW
•Wipe the steering column with a paper towel to remove any excess lubricant.
•Turn the vehicle on its side.
•Insert the straight end of the steering column up through the hole in the vehicle frame and the vehicle floor and out through the hole in the dash.
•While holding the steering column in place, turn the vehicle upright.
5/32" (4 mm) x 11/2" (3,8 cm) Pin | End of |
| Steering |
| Column |
6
•Insert the 5/32" (4 mm) x 11/2" (3,8 cm) pin through the hole in the end of the steering column.
•Lower the steering column so that the pin fits inside the center of the steering wheel.
Steering
Wheel
Cap
Tab UP
Steering
Column
5SIDE VIEW
Steering
Wheel
Large Opening UP
7
•Fit the steering wheel cap into the center of the steering wheel.
•Insert two #10 x 3/4" (1,9 cm) screws and tighten.
•Position the steering wheel so that the large opening and the tab on the steering wheel stem are both UP.
•Fit the steering wheel onto the steering column.
9 |
